Panasonic PT-DZ870K Specification - Page 15

Browse online or download pdf Specification for Projector Panasonic PT-DZ870K. Panasonic PT-DZ870K 26 pages. Panasonic projector

Print Page
TM
DLP
Projector
Formula for calculating possible heights when using the ET-DLE030
If using a screen size which has not been previously mentioned, use the following calculation formulas to
obtain the possible setting-up height.
For screen aspect ratio of 16:10
For screen aspect ratio of 16:9
For screen aspect ratio of 4:3
* There may be a small margin of error in the values obtained from the above formulas.

Shift range

Optical
axis shift function allows to shift the position of a projected image as shown below.
• Floor mount
(When the lens except the ET-DLE085 is mounted.)
(Width of
projected image)
0.1H
• Floor mount
(When the ET-DLE085 is mounted.)
(Width of
projected image)
0.1H
• The ET-DLE055 has a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.
As of September 2013
SFD13M004-2
PT-DZ870K/DZ870W/DZ870LK/DZ870LW
Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.0-72.1
Possible setting-up height A2 (mm) = A1 + 200
Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.9-72.1
Possible setting-up height A2 (mm) = A1 + 200
Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.7-72.1
Possible setting-up height A2 (mm) = A1 + 200
H
0.1H
Standard postition
of projected image
H
0.1H
Standard postition
of projected image
• Ceiling mount
(When the lens except the ET-DLE085 is mounted.)
0.1H
(Width of
projected image)
• Ceiling mount
(When the ET-DLE085 is mounted.)
0.1H
(Width of
projected image)
Standard postition
of projected image
0.1H
H
Standard postition
of projected image
0.1H
H
1 5 / 2 5