Panasonic PT-F200 Series Specifications - Page 9

Browse online or download pdf Specifications for Projector Panasonic PT-F200 Series. Panasonic PT-F200 Series 11 pages. Lcd projector
Also for Panasonic PT-F200 Series: Specification Sheet (10 pages), Specifications (6 pages), Quick Manual (1 pages), Setup And Operation Manual (37 pages), Quick Manual (1 pages), Dimensions (1 pages), Advanced Operation Manual (33 pages), Brochure & Specs (6 pages)

Print Page

LCD Projector

Parameter format

Size (Byte)

<pl>

3 (1 or 2 bytes also

possible when

under control)

<date>

<time>

NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.

To set the volume to +30, send the command as shown below.

STX

Start

NOTE: When sending commands without parameters, a colon (:) is not necessary.

As of October 2008

Difinition

Dicimal without signs: 0-999 (000, 001, 002...999)

Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)

Callback from the projector is 3 Byte.

0 = off, 1 = on

RG1 = computer 1, RG2 = computer 2, NWP = network,

YUV = component, VID = video, SVD = S-Video

0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear

ENG = English, DEU = German, FRA = French, ESP = Spanish,

ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese,

SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish,

CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, KOR = Korean

000 = power on (standby mode on), 001 = power off (standby mode off)

0 = standby, 1 = lamp on under control, 2 = lamp off,

3 = lamp off under control

Dicimal without signs: 0000-9999 hours

0 = economy, 1 = normal

y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)

Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7

h1h2m1m2s1s2 = hour (h) minute (m) second (s)

AVL

Command

Parameter

ETX

End

PT-F200

< 9 >