Panasonic PT-L6510E Operating Instructions Manual - Page 28
Browse online or download pdf Operating Instructions Manual for Projector Panasonic PT-L6510E. Panasonic PT-L6510E 50 pages. 3600 ansi lumens sxga lcd projector 4200 ansi lumens xga lcd projector
Also for Panasonic PT-L6510E: Brochure & Specs (6 pages)
Print Page
On-screen menus
Basic Menu Operations
1. Press the "MENU" button.
The MAIN MENU appears on the screen.
(e.g. : MAIN MENU for the PT-L6510E)
MENU
INDEX WINDOW
PICTURE
POSITION
AUDIO
ZOOM/FOCUS
LANGUAGE
OPTION 1
OPTION 2
SELECT
2. Select (highlight) the desired item with the
or
buttons.
Selected items are displayed in yellow.
MENU
INDEX WINDOW
PICTURE
POSITION
AUDIO
ZOOM/FOCUS
LANGUAGE
OPTION 1
OPTION 2
SELECT
3. Press the "ENTER" button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : PICTURE Menu)
PICTURE
PICTURE MODE
COLOUR
BRIGHT
CONTRAST
SHARPNESS
W-BAL R
W-BAL G
W-BAL B
SIGNAL MODE
STANDARD
SELECT
ADJ
4. Highlight the desired adjustment item with
the
or
parameter value with the
An individual bar graph as shown in the following
figure is displayed for each adjustment item.
BRIGHT
• If no button is operated for approx. 5 seconds while a
bar graph is displayed, the screen will return to the
previous page.
28
ENTER
ENTER
ENTER
NATURAL
32
32
32
00
32
32
32
XGA
ESC
buttons, then change the
or
32
Returning to the Previous Page
• Pressing the "MENU" button returns the screen to the
previous menu page.
• When the MAIN MENU is on the screen, pressing the
MENU button clears all menus from the screen.
Menu Items Shown with White Characters
• Some menu items may not be valid for some signal
formats applied to the projector. Invalid menu items
are shown in white letters and the "ENTER" button
remains ineffective to those items.
Menu Items Setting
The bottom prompt line differs on each menu
depending on the selected menu option:
• The prompt "
adjustment.
• The prompt "
bar graph.
Reset the Factory Default
If the "STANDARD" option in the "PICTURE" or "POSITION"
menus is chosen, or the "STANDARD" option in the remote
control's "FUNC1" button menu is chosen, all the parameter
values in the menu are reset to the factory default.
• Default Setting in Menu
When all the parameter values in the menu are reset
to the factory default, a "STD" indicator appears on
the upper right corner of the menu.
• Default Setting on Bar Graph
If the parameter value on a bar graph is reset to the
factory default, the bar turns to green.
BRIGHT
Note
buttons.
• The upper and lower triangular markings on a
ADJ" is displayed for direct
ENTER" appears for a separate
PICTURE
STD
PICTURE MODE
NATURAL
COLOUR
32
BRIGHT
32
CONTRAST
32
SHARPNESS
00
W-BAL R
32
W-BAL G
32
W-BAL B
32
SIGNAL MODE
XGA
STANDARD
SELECT
ADJ
ESC
BRIGHT
63
bar graph indicate the default setting for the
parameter. If no such triangular markings are
shown on the bar graph, the parameter cannot
be reset to the factory default.
Indicates the current
parameter value.
32
Indicates the
factory default.