Panasonic PT-VX400NT Brochure - Page 6
Browse online or download pdf Brochure for Projector Panasonic PT-VX400NT. Panasonic PT-VX400NT 6 pages. Pt-vw440/3300 series
Also for Panasonic PT-VX400NT: Brochure & Specs (10 pages), Specification (13 pages), Dimensional Drawing (1 pages), Overview (8 pages), Specifications (13 pages), Specifications (10 pages)
Print Page
Specifications
Model
Power supply
322 W (0.48 W when standby mode
Power consumption
set to Eco*¹, 12.5 W when standby
mode set to Network.)
15 mm (0.59 inches)
Panel size
diagonal (16:10 aspect ratio)
LCD panel
Display method
1,024,000 (1,280 × 800) x 3,
Pixels
total of 3,072,000 pixels
Lens
Lamp
Screen size (diagonal)
Brightness*³
3,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity*³
Contrast*³
Resolution
1,280 × 800 pixels*⁴
HDMI
RGB (analog)
Scanning
frequency
YP
P
(YC
C
)
B
R
B
R
Video/S-Video
f
Optical axis shift
Keystone correction range
(±20° when Real-Time Keystone)
Installation
HDMI IN
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*⁶,
COMPUTER IN 1
COMPUTER IN 2 /
MONITOR OUT
VIDEO IN
S-VIDEO IN
AUDIO IN
Terminals
COMPUTER AUDIO IN 1
COMPUTER AUDIO IN 2
(MIC IN)
AUDIO OUT
SERIAL IN
LAN
USB A
USB B
Built-in speaker
Noise level
Cabinet materials
Dimensions (W × H × D)
350 x 97 x 277 mm (13.8" x 3.8" x 10.9") (with legs at shortest position, not including protruding parts)
Weight
Approximately 3.5 kg (7.7 lbs)
Operating environment
Standard
Wireless
Infrastructure mode
Ad-hoc
mode*⁷
Supplied accessories
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring &
Dimensions
350 (13-3/4)
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTE ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector's exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please
consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the
United States, and other countries and regions or registered trademarks. All other trademarks are the property of their respective
trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
PT-VW330
PT-VX400NT
100-240 V AC, 50/60 Hz
322 W (0.48 W when standby mode
set to Eco*¹, 14.5 W when standby
mode set to Network.)
Transparent LCD panel (x 3, R/G/B)
786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
1.6x manual zoom (throw ratio: 1.2–1.9:1), manual focus, F 1.65–2.33, f 15.47–24.53 mm
245 W × 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*²
0.76–7.62 m (30–300 inch)
2,000:1 (full on/full off, lamp power: Auto)
f
: 25–80 kHz, f
: 50–85 Hz, dot clock: 162 MHz or lower
H
V
f
: 15–100 kHz, f
: 50–100 Hz, dot clock: 140 MHz or lower
H
V
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
f
: 15.75 kHz, f
: 60 Hz [480i(525i)]
H
V
f
: 31.50 kHz, f
: 60 Hz [480p(525p)]
H
V
f
: 45.00 kHz, f
: 60 Hz [720(750)/60p]
H
V
f
: 33.75 kHz, f
: 60 Hz [1080(1125)/60i]
H
V
: 15.75 kHz, f
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f
H
V
49:1
Vertical: ±40°, Horizontal: ±30°
Vertical: ±30°
(Vertical: ±30°, Horizontal: ±20° when
Auto Keystone)
Ceiling/floor, front/rear
HDMI 19-pin x 1 (compatible with HDCP)
compatible with non-interlaced signals only, dot clock: 25 -146.25 MHz
D-sub HD 15-pin (female) x 1 (RGB/YP
D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
RCA pin × 1 (Composite VIDEO)
Mini DIN 4-pin × 1 (S-VIDEO)
RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
M3 x 1 (L-R x 1)
M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
M3 x 1 (L-R x 1) for output (variable)
D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
USB type-A (for the USB Memory
—
Viewer) x 1
USB type-B (for the USB Display/
—
Wireless Mouse) x 1
3.7 cm round shape × 1, output power: 10.0 W (monaural)
35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Molded plastic
Approximately 3.6 kg (7.9 lbs)
Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)
—
IEEE802.11b/g/n
WPA-PSK (TKIP/AES), WPA2-PSK
(TKIP/AES), 128 bit/64 bit WEP,
WPA-EAP/WPA2-EAP
—
(PEAP[MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS[MD5/MS-CHAPv2])
—
128 bit/64 bit WEP
Power cord x 1*⁸, wireless remote control unit, batteries (AAA/R03/LR03 type × 2),
carrying bag x 1, RGB cable x 1, filter cover
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control
Control Software)
Software, Wireless Manager ME 5.5)
Optional accessories
unit: mm (inch)
Replacement lamp unit
ET-LAV100
277 (10-7/8)
PT-VX400
322 W(0.48 W when standby mode
set to Eco*¹, 10.0 W when standby
mode set to Network.)
16 mm (0.63 inches) diagonal (4:3 aspect ratio)
4,000 lm (lamp power: Auto/Normal)
85%
1,024 × 768 pixels*⁵
f
: 15.63 kHz, f
: 50 Hz [576i(625i)]
H
V
f
: 31.25 kHz, f
: 50 Hz [576p(625p)]
H
V
f
: 37.50 kHz, f
: 50 Hz [720(750)/50p]
H
V
f
: 28.13 kHz, f
: 50 Hz [1080(1125)/50i]
H
V
: 15.63 kHz, f
: 50 Hz [PAL/PAL-N/SECAM]
H
V
9:1
Vertical: ±30°
(±20° when Real-Time Keystone)
P
/YC
C
x 1)
B
R
B
R
—
—
Approximately 3.5 kg (7.7 lbs)
—
—
—
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Replacement filter unit
ET-RFV100
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projector's intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
Projection distance
PT-VW330
(16:10 aspect ratio; throw ratio: 1.2–1.9:1)
Projection distance (L)
Diagonal
image size
min.(wide) max.(tele)
0.76 [30"]
0.7 (2.3)
1.02 [40"]
1.0 (3.3)
1.27 [50"]
1.3 (4.3)
1.52 [60"]
1.5 (4.9)
1.78 [70"]
1.8 (5.9)
2.03 [80"]
2.0 (6.6)
2.29 [90"]
2.3 (7.5)
2.54 [100"]
2.5 (8.2)
3.05 [120"]
3.1 (10.2)
3.81 [150"]
3.8 (12.5)
5.08 [200"]
5.1 (16.7)
6.35 [250"]
6.4 (21.0)
7.62 [300"]
7.7 (25.3)
PT-VX400NT/VX400
(4:3 aspect ratio; throw ratio: 1.2–1.9:1)
Projection distance (L)
Diagonal
image size
min.(wide) max.(tele)
"
0.76 [30
]
0.7 (2.3)
1.02 [40
"
]
1.0 (3.0)
"
1.27 [50
]
1.2 (3.9)
1.52 [60
"
]
1.4 (4.6)
"
1.78 [70
]
1.7 (5.6)
2.03 [80
"
]
1.9 (6.2)
"
2.29 [90
]
2.2 (7.2)
2.54 [100
"
]
2.4 (7.9)
"
3.05 [120
]
2.9 (9.5)
3.81 [150
"
]
3.6 (11.8)
"
5.08 [200
]
4.8 (15.7)
6.35 [250
"
]
6.0 (19.7)
7.62 [300
"
]
7.2 (23.6)
*1 When the Standby mode is set to Eco, network functions such as
standby on via LAN are not available. Also, only certain commands
can be received for external control using the serial terminal.
*2 The values given for the recommended lamp replacement cycles
are maximum. *3 Measurement, measuring conditions, and method
of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to
1,280 x 800 pixels. *5 Input signals that exceed this resolution will be
converted to 1,024 x 768 pixels. *6 Compliant with VESA CVT-RB.
*7 Not supported by IEEE802.11n. *8 Power cords available (x 2) for
the PT-VW330EA/VX400NTEA/VX400EA. *9 There is no guarantee of
the lens performance when the projection distance exceeds 8.0 m
(26.2 feet).
Ceiling mount
Ceiling mount bracket
bracket for
for low ceilings*¹⁰
high ceilings*¹⁰
ET-PKV100S
ET-PKV100H
*10 This product is used together with an optional bracket assembly (sold separately).
For more information about Panasonic projectors
http://panasonic.net /avc/projector
All information included here is valid as of December 2011.
PT-VW330G2 Printed in Japan.
unit: meters (feet)
Height from the
edge of screen to
center of lens (H)
1.2 (3.9)
0.01 (0.03)
1.6 (5.2)
0.01 (0.03)
2.0 (6.6)
0.01 (0.03)
2.5 (8.2)
0.02 (0.07)
2.9 (9.5)
0.02 (0.07)
3.3 (10.8)
0.02 (0.07)
3.7 (12.1)
0.02 (0.07)
4.1 (13.5)
0.03 (0.1)
4.9 (16.1)
0.03 (0.1)
6.2 (20.3)
0.04 (0.13)
8.0 (26.2)
*⁹
0.05 (0.16)
8.0 (26.2)
*⁹
0.07 (0.23)
8.0 (26.2)
*⁹
0.08 (0.26)
Height from the
edge of screen to
center of lens (H)
1.1 (3.6)
0.05 (0.16)
1.5 (4.9)
0.06 (0.2)
1.9 (6.2)
0.08 (0.26)
2.3 (7.5)
0.09 (0.3)
2.7 (8.9)
0.11 (0.36)
3.1 (10.2)
0.12 (0.39)
3.5 (11.5)
0.14 (0.46)
3.9 (12.8)
0.15 (0.49)
4.7 (15.4)
0.18 (0.59)
5.8 (19.0)
0.23 (0.75)
7.8 (25.6)
0.31 (1.02)
8.0 (26.2)*⁹
0.38 (1.25)
8.0 (26.2)*⁹
0.46 (1.51)
Bracket assembly
ET-PKV100B