Panasonic PTAE100U - LCD PROJECTOR Operating Instructions Manual - Page 20
Browse online or download pdf Operating Instructions Manual for Projector Panasonic PTAE100U - LCD PROJECTOR. Panasonic PTAE100U - LCD PROJECTOR 27 pages. Lcd home cinema projector pt-ae100u operating manual
Also for Panasonic PTAE100U - LCD PROJECTOR: Operating Instructions Manual (27 pages)
Print Page
FRONT/REAR
F R O N T / R E A R
F R O N T
R E A R
This setting should be changed in
accordance with the projector
setting-up method.
Set to "FRONT" when using a
normal reflective screen with the
projector positioned in front of the
screen, and set to "REAR" when
using a translucent screen with the
projector positioned behind the
screen.
DESK/CEILING
D E S K / C E I L I N G
D E S K
C E I L I N G
This setting should be changed in
accordance with the projector
setting-up method.
Set to "DESK" when setting up the
projector on a desk or similar, and
set to "CEILING" when suspending
the projector from the ceiling using
the ceiling bracket which is sold
separately.
LAMP POWER
L A M P P O W E R
H I G H
L O W
This setting changes the lamp
brightness. When set to "LOW", the
luminance of the lamp is reduced,
but the projector uses less power,
and the operating noise is also
reduced.
The LOW position is recommended
for narrow rooms where a high
picture luminance is not essential or
for watching movies.
38
All manuals and user guides at all-guides.com
LAMP TIME
This setting displays the usage time
[
for the lamp unit which is currently
being used.
NOTE:
B The lamp's operating life varies
depending on the usage
conditions (such as the LAMP
POWER setting and the number
of times the power is turned on
and off).
FUNCTION
F U N C T I O N
This sets the operation that will be
[
carried out when the FUNCTION
button is pressed.
INDEX will activate the Index
Window, splitting the screen into a
still image and a moving image.
(Refer to page 32.)
FREEZE will temporarily freeze the
image. (Refer to page 27.)
[
I N D E X
[
F R E E Z E
Indicators
There are two indicators on th
information about the operatin
illuminate or flash to warn you
projector, so if you notice that
and check the table below for
Indicator
Illuminated (red)
display
(Lamp unit on)
The surrounding
temperature or the
temperature inside
the projector has
become unusually
high.
Problem
B The ventilation ho
Possible
B The ambient tem
cause
B The air filter may
B Uncover the vent
B Set up the projec
between 0 °C (32
Remedy
between 20% and
B Turn off the MAIN
on page 23, and