Panasonic CS-PMX100 Operating Instructions Manual - Page 15
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic CS-PMX100. Panasonic CS-PMX100 24 pages.
Print Page
Viewing available information
You can view information about the DAB broadcast,
programme type, ensemble label, frequency and time.
Press [DISPLAY] to view available information.
DAB settings
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB Secondary
Primary
To listen to primary service.
Secondary
To listen to secondary services.
"
" is shown.
Auto Clock Adj
On Adjust
Start auto clock adjustment.
Off Adjust
Cancel auto clock adjustment.
DAB signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select "Signal
Quality".
2
Press [2, 1] to select frequency.
The current frequency block is displayed and then
the reception quality is indicated.
Reception quality
0 (poor) to 8 (excellent)
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Preparation
Connect the external equipment.
1
Press [RADIO, EXT-IN] repeatedly to select
"AUX".
2
Play the external equipment.
Using the PC input
You can play back music on the PC with this system's
speakers by connecting a PC to the PC IN terminal on
the main unit.
About supported format, refer to "Specifications" (
Before connecting to a PC
Follow the steps below.
• Refer to the following for the recommended OS
versions for your PC:
– Windows Vista, Windows 7, Windows 8,
Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
1 Download and install the dedicated driver to the
PC. (Only for Windows OS)
Download and install the driver from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
2 Download and install the dedicated app
"Panasonic Audio Player" (free of charge) on
your PC. (For Windows OS and OS X)
Download and install the app from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
Listening to audio from a PC
1
Disconnect the AC mains lead.
2
Connect the main unit and a PC.
Main unit (rear)
Type B
21).
3
Connect the AC mains lead to the main unit and
turn this system on.
4
Press [RADIO, EXT-IN] repeatedly to select "PC".
5
Operate the PC for playback.
Note:
• When you play back high-resolution audio, it is
recommended that you use a compatible USB 2.0 High
Speed Cable.
(as of March 2015)
PC
USB
Type A
USB 2.0 cable
(not supplied)
15