Panasonic MW10 - 9.0" - Digital Photo frame Operating Instructions Manual - Page 19

Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic MW10 - 9.0" - Digital Photo frame. Panasonic MW10 - 9.0" - Digital Photo frame 24 pages. Multimedia audio system
Also for Panasonic MW10 - 9.0" - Digital Photo frame: Operating Instructions Manual (24 pages)

Using the timer

Photos or audio are automatically played at the set time.
"Timer 1", "Timer 2" and "Timer 3" can be set.
Set the clock beforehand ( P9)
To listen to the radio, tune in to channels beforehand.
In the timer setting, set only audio source and volume for audio playback. For Random, Repeat play, etc. make the settings
before the timer playback starts.
The following explains the case when setting "Timer 1" as
an example.
1. Press [zTIMER].
2. Press [w, q] to select "Timer
1 Settings" and press [OK].
3. Set the standby setting to
Enable.
1. Press [e, r] to select
"Standby" and press [OK].
2. Press [e, r] to select
"Enable This Timer" and
press [OK].
4. Set the day.
1. Press [e, r] to select "Day"
and press [OK].
2. Press [e, r] to select the
day, add the check mark with
[w, q] and press [OK].
5. Set the time.
1. Press [e, r] to select "Time"
and press [OK].
2. Press [w, q, e, r] to set
the start/end time and press
[OK].
You can also use the numbered buttons.
e.g.) 9: [0]
[9]
10: [1]
[0]
6. Select Audio Playback ON/
OFF.
1. Press [e, r] to select "Audio
Playback" and press [OK].
2. Press [e, r] to select "Audio
Playback", press [w, q] to
select "On" or "Off".
To return to the previous screen
Press [
RETURN].
To return to the timer setting menu
Press [zTIMER].
To disable the set timer
Select "Disable This Timer" in step 3 -2 and press [OK].
To delete the timer setting
Select "Initialize This Timer" in step 3 -2 and press [OK].
When the timer is set
When the unit is turned on, if the audio playback is "On",
"z" is displayed one minute before the timer start time.
At the timer start time, the sound is faded in to the set
volume and the audio is played back. (z blinks)
Timer Setting Menu
Timer 1 Settings
Timer
AM12
3
6
9
Sun
M
Timer 1 Settings
Standby
Enable
Day
Unset
Time
12:00 A
Timer 1 Day Settings
Sunday
Monday
Tuesday
Wednesday
Thursday
Start Time
End Time
7
00 AM
8
00 AM
Timer 1 Audio Settings
Audio Playback
On
Playback Time
30 minutes
Update Source/Volume
Source: CD
Note
Only when audio playback is set
7. Press [e, r] to select
"Playback Time" and press
[w, q] to select the playback
time.
10 minutes/30 minutes/1 hour/
2 hours/3 hours/No Limit
8. Press [e, r] to select
"Update Source/Volume" and
press [OK].
The sound source and volume are displayed.
When you do not change, press [w, q] to select
"No" and press [OK].
When you change, make the setting using the
audio selection button or volume button, press
[w, q] to select "Yes" and press [OK].
As a test, the sound source can be played.
9. Press [e, r] to select "Confi rm" and press [OK].
10. Press [e, r] to select "Confi rm" and press [OK].
If the operation time overlaps other timer settings, the
confi rmation message appears.
If "Yes" is selected, other timers with the overlapped
time are disabled.
If "No" is selected, the original screen is restored with
the contents of timer setting reserved.
11. Press [
RETURN].
The standard screen is restored.
The timer operates at the set time unless you set it to
"Disable".
The timer less than 10 minutes may not be displayed on
the timer setting screen. (When the audio playback is "On",
only "
" is displayed.)
When the Setup Menu, etc. is displayed, audio playback
with the timer does not start.
Audio playback with the timer may not start if the audio
media selected for "Audio Playback" is the same as the
one selected when the timer starts.
During CD playback, pause or search
During iPod playback or search
When the radio frequency being received is the same,
and the Auto/Monaural setting is the same
Timer 1 Audio Settings
Audio Playback
On
Playback Time
1 hour
Update Source/Volume
Source: CD
Playback Time
1 hour
Update Source/Volume
Source:CD
Volume:25
Confirm
19