Panasonic RX-D45 Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RX-D45. Panasonic RX-D45 8 pages. Portable stereo cd system
Also for Panasonic RX-D45: Operating Instructions Manual (8 pages), Operating Instructions Manual (20 pages)
Print Page
Overview of controls
O
P
A
B
C
D
E
A Tape mode/standby switch
Unit will be in standby mode.
B OPR (operation) indicator
The indicator lights up when the unit is turned on.
C Clock or timer setting, play timer setting
D Speakers
These speakers do not have magnetic shielding. Do not place them near
televisions, personal computers or other devices easily infl uenced by
magnetism.
E Disc tray
F Tuner (FM/AM) selection, auto preset selection
G Disc play or pause
H Stop disc playback, MONO selection for FM mode
I Disc tray open or close
J Play mode function, program function, tuning mode selection
K Track skip or search, check program content, preset channel selection,
tuning function, time adjustment
L Sound equalizer (EQ) selection
M Display panel
N Volume control
O Cassette play operations
P Cassette deck
Headphone jack (PHONES)
Plug type: Ø 3.5 mm stereo (not included)
• Avoid listening for prolonged periods of time to prevent hearing damage.
• Excessive sound pressure from earphones and headphones can cause
hearing loss.
4
F
G H
I
D
PHONES
Discs
Basic play
Basic play
1
Press [x, CD OPEN/CLOSE] to open the disc tray and then load the
disc with the label facing up.
2
Press [x, CD OPEN/CLOSE] again to close.
3
Press [4/9, CD] to start play.
N
Stop playback
Press [8] (stop) during play.
Pause play
Press [4/9, CD] during play.
M
Press again to resume play.
L
Skip tracks
Press [–/2] or [6/+].
During RANDOM play, you cannot skip to tracks that have
K
been played.
Search
Press and hold [–/2] or [6/+] during play or pause.
J
through
• During program play (Z see below), or random play
tracks
(Z see below, "Play Mode function"), you can search
only within the track.
Play Mode function
Press [·PLAY MODE] repeatedly to select the desired mode.
1-TRACK
Play one selected track repeatedly on the disc.
REPEAT
Press [–/2] or [6/+] to select the track.
1-
REPEAT
Repeat play a disc or programmed tracks (Z see below).
RANDOM
Play a disc randomly.
RND
✒
Note
During "Program play", "Play Mode function" cannot be activated.
Program play
This function allows you to program up to 24 tracks.
1
Press [4/9, CD] and then [8] (stop).
2
Press and hold [–PGM].
"PGM" is displayed.
3
Press [– /2] or [6/+] to select your desired track.
4
Press [–PGM].
Repeat steps 3 and 4 to program other tracks.
5
Press [4/9, CD] to start play.
Cancel program
Press and hold [–PGM] in the stop mode.
mode
Replay the program
Press and hold [–PGM] then [4/9, CD] in the stop
mode.
Check program
Press [–/2] or [6/+] when "PGM" is displayed in
contents
the stop mode.
Clear all
Press and hold [8] (stop) in the stop mode.
programmed tracks
"CLEAR" is displayed.
✒
Note
• When you try to program more than 24 tracks, "FULL" appears.
• You will not be able to add more tracks to the existing program. The existing
program has to be cleared.
• The program memory is cleared when you open the disc tray.
✒
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifi cations of the Compact Disc Digital Audio (CD-DA) format so playback
may not be possible.
✒
NOTE on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play CD-DA format audio CD-R/RW that have been fi nalised.
• It may not be able to play some CD-R/RW due to the condition of the
recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.