Panasonic RX-ES23 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RX-ES23. Panasonic RX-ES23 16 pages. Portable stereo cd system
Also for Panasonic RX-ES23: Operating Instructions Manual (29 pages)
Print Page
The Radio
Preparation:
≥
When using batteries, press
≥
Press [TUNER BAND] to select "FM" or "AM".
Manual tuning
[1] Press [REW/–/
6
5
] or [
To tune automatically
Press and hold [REW/–/6] or [5/+/FF] until the
frequency starts changing rapidly.
≥ Auto tuning may be interrupted when there is excessive
interference.
≥ To cancel auto tuning, press [REW/–/6] or
[5/+/FF] once again.
[2] Press [+, – VOLUME] to adjust volume.
To use auto scan
You can search for a station by listening to all tuned-in stations
for 8 seconds each.
[1] Press [AUTO SCAN].
[2] Press [AUTO SCAN] when you find the desired
station.
Auto scan ends when it reaches the original frequency again.
To stop during the process, press [AUTO SCAN].
To improve FM sound quality
Press [PLAY MODE] to display "
Monaural sound is selected and noise reduces when reception
is weak.
Press [PLAY MODE] again to cancel the mode.
≥
To improve reception
FM : Change the length and direction of the antenna.
AM : Change the direction of the unit.
FM
≥ AM reception is briefly interrupted if [< DECK] is pressed.
≥ To improve reception when using the unit in a building or
vehicle, place it near a window.
[
]
.
/+/FF] to select a station.
".
AM
Preset tuning
Up to 16 stations can be set in the FM and AM band.
[1] Press [REW/–/
6
] or [
required station.
[2] Press [ MEMORY CLEAR].
[3] While "
" is flashing
Turn [TIME/PRESET TUNE
the channel and press [ MEMORY CLEAR] or on
remote control, press the numeric buttons to select
channels.
≥ For channels 1 to 9, press the corresponding number.
≥ For channels 10 to 16, press [S10], then the two digits.
" goes off during presetting, return to step [1].
If "
To select channels
Turn [TIME/PRESET TUNE
select the channel or on remote control, press the
numeric buttons to select channels.
To use preset scan
You can search for a station by listening to all preset channels
for 8 seconds each.
: ALBUM] or [ALBUM 9
[1] Press and hold [C
D] until "PS" appears on the display.
/
[2] Press [C
: ALBUM] or [ALBUM 9
/
you find the desired channel.
Preset scan ends after searching through each preset channel
once. To stop during the process, press
D]
9/
[ALBUM
.
To skip the preset channel,
1 Select the desired station.
2 Press [ MEMORY CLEAR].
3 While "
" is flashing
Turn [TIME/PRESET TUNE
"– –".
4 Press [ MEMORY CLEAR].
To select the skipped channel,
Press the numeric buttons.
5
/+/ FF] to tune to the
TRACK SKIP
] to select
TRACK SKIP
] to
D] when
/
[C
ALBUM]
/:
TRACK SKIP
] to display
/
or
7
RQT7912