Panasonic RX-ES23 Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RX-ES23. Panasonic RX-ES23 29 pages. Portable stereo cd system
Also for Panasonic RX-ES23: Operating Instructions Manual (16 pages)
Print Page
To
Operations
stop recording
Press [∫ TAPE/CD].
pause recording
Press [¥/;].
1 Press [< CD] and replace
continue recording
from another CD on
the same cassette
2 Press [¥/;].
during pause or stop.
1 Do step [1] and [2], then
record selected tracks
2 Press [¥/;].
1 Press [¥/;] to pause
skip unwanted tracks
2 Turn [TIME/PRESET TUNE
3 Press [¥/;] to resume
[CD-DA]
ALL-REC
Records the whole CD or selected tracks. When the tape
finishes before CD, recording and CD pauses for you to resume
recording on the opposite side.
[1] Press [∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display "ALL-REC".
Each time you press the button:
n ,
#
ALL-REC
=====
]
The display shows the tape length needed.
"C – – – –" indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if
the tape is not long enough.
[3] Press [< DECK] to open the deck and load a
cassette with the side for recording facing up.
[4] Press [¥/;] to start recording.
The unit rewinds the tape, records 10 seconds of silence,
and then starts recording.
To stop recording, press [∫ TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side facing up,
Recording and CD pauses.
To
Operations
1 Press [< DECK], flip the
record the track again
on the opposite side
2 Press [¥/;].
§
The unit records 10 seconds of silence, and resumes
recording from the beginning of the cut-off track.
Note:
≥
Random play and repeat play cannot be used with
"ALL-REC".
the CD.
Press again to resume
recording.
program the tracks. (l 9)
recording. (The CD also
pauses.)
TRACK SKIP
] so the
next track you want to record is
displayed.
recording.
]
#
1-REC
OFF
=====
n
cassette, and insert it.
§
1-REC
[CD-DA] [MP3]
Records a selected track from the CD and stops.
Preparation:
Wind on the tape to where you want to start recording.
[1] Press [∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display "1-REC".
[3] Turn [TIME/PRESET TUNE
select the track you want to record.
[4] Press [¥/;] to start recording.
CD play and recording start at the same time.
To
Operations
stop recording
Press [∫ TAPE/CD].
(The CD also stops.)
1 Press [< CD] and replace the
continue recording
from another CD
2 Do steps [3] and [4].
1 Press [CD REC MODE] to
record a track in play
2 Press [¥/;].
Recording starts from the
beginning of the track and stops
when the track finishes.
Note:
≥
Recording and CD will stop when the tape reaches its end,
even if the track has not finished.
Recording the Radio
Preparation:
To record from the beginning of the tape;
Wind on the leader tape.
To record from part or half way through the tape;
Wind on the tape to where you want to start recording.
[1] Load a cassette with the side for recording
facing up.
[2] Tune to the station.
[3] Press [¥/;] to start recording.
To
Operations
stop recording
Press [∫ TAPE/CD].
pause recording
Press [¥/;].
Press again to resume recording.
To reduce noise when recording AM (Beat Proof function)
Remote control only
1 Press [PLAY MODE] while recording.
Each time you press the button:
bP1 ,-. bP2
Choose the setting with the least noise.
TRACK SKIP
] to
CD.
display "1-REC".
11
RQT7914