Panasonic RX-ES27 Operating Instructions Manual - Page 38
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RX-ES27. Panasonic RX-ES27 40 pages. Portable stereo cd system
Also for Panasonic RX-ES27: Operating Instructions Manual (40 pages), Operating Instructions Manual (22 pages), Operating Instructions Manual (40 pages)
Troubleshooting
Before requesting service, make the below checks. If you can't fix the unit as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers (e.g.
Common problems
"E" is displayed.
"U01" is displayed.
"U02" is displayed.
CD
CD won't play or CD display is incorrect.
Certain sections are not played properly.
Cassette deck
Recording is not possible.
Poor sound quality.
Radio
A lot of noise or difficult to tune.
Remote control
The remote control doesn't work.
The unit can't be turned on from the
remote control.
Technical Specifications
Radio
Frequency range
FM
AM
CD player
Sampling frequency
Decoding
Beam source
No. of channels
Wow and flutter
D/A converter
Tape recorder
Track system
Monitor system
Recording system
Erasing system
Frequency range
Normal position
38
Indicates incorrect operation. Read the instructions.
Replace the batteries or use household AC power.
Power batteries haven't been inserted. Insert them or use household AC power. ("U02" ap-
pears only if you have inserted memory batteries.)
Place the CD label facing up.
Wait for an hour for condensation to dry and try again.
Clean the CD.
Replace the CD if it is scratched, warped, or nonstandard.
If the cassette's tabs have removed, cover the holes with adhesive tape.
Clean the heads.
Interference may be caused by other equipment or the use of its remote control. Turn the
other equipment off or separate this unit from them.
Check the batteries are inserted correctly.
Replace the batteries if they are worn.
Turn the unit on from the main unit if you are using batteries to power the unit.
87.50 –108.00 MHz (50 kHz steps)
522 –1629 kHz (9 kHz steps)
520–1630 kHz (10 kHz steps)
16 bit linear
Semiconductor laser (wavelength 780 nm)
2 channel, stereo
Below measurable limit
MASH (1 bit DAC)
4 track, 2 channel, stereo
Variable sound monitor
Multi Pole magnet
50 –14000 Hz
6
)
à
à
Ç
Ä
Ä
General
Speakers
Jacks
Output
Power output
44.1 kHz
Power requirement
AC
Battery
Memory back-up for computer/clock
AC bias
Dimensions (WxHxD)
Mass
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
6
6
ê
6
Ä
,
(RX-ES27) 8 cm 5.4 Ω x 2
(RX-ES22) 8 cm 2.7 Ω x 2
PHONES: 3.5 mm stereo (16 –32 Ω)
(RX-ES27) 140W (PMPO)
(RX-ES22) 70W (PMPO)
110V-127V / 220V-240V, 50/60 Hz
Power consumption: (RX-ES27) 33W
(RX-ES22) 20W
12 V [Eight R20/LR20 (D, UM-1) batteries]
•
Do not use rechargeable type batteries.
6 V [Four R6/LR6 (AA, UM-3) batteries]
•
Do not use rechargeable type batteries.
529 x 144 x 276 mm
(RX-ES27) 4.5 kg without batteries
(RX-ES22) 4.0 kg without batteries