Panasonic RXDS28 - RADIO CASSETTE W/CD Operating Instructions Manual - Page 14

Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RXDS28 - RADIO CASSETTE W/CD. Panasonic RXDS28 - RADIO CASSETTE W/CD 20 pages. Portable stereo cd system
Also for Panasonic RXDS28 - RADIO CASSETTE W/CD: Operating Instructions Manual (21 pages), Operating Instructions Manual (20 pages), Operating Instructions Manual (20 pages), Operating Instructions Manual (20 pages)

Panasonic RXDS28 - RADIO CASSETTE W/CD Operating Instructions Manual
Before recording
To take up the leader tape: EY
Only normal tapes can be used.
The sound may not be recorded properly if high position tapes and
metal position tapes are used with this unit.
References
® Any changes made to the volume or sound quality during recording
will not affect the recording.
è In order to prevent trouble caused
by flat batteries, it is
recommended that you either supply power to the unit from the
household AC outlet or replace all the batteries with new ones
when you are recording something which is important to you.
® The recording level is set automatically.
Leader tape
(Recording cannot be made.)
FM MODE/BP
Note |
If the unit is brought near a TV set during recording, noise may be
CD PLAY MODE
recorded due to the effects of the signals from the TV set. Maintain a
distance of at least 1.5 meters between the unit and a TV set.
1. Load the recorded tape with the side to be erased facing upward.
2. Press GEGS/OFF.
3. Press @ (REC).
PLAY is also depressed with @ (REC).
Recording from radio broadcasts O
il Press &/4 STOP/EJECT and load the tape.
Load the tape with the side to be recorded facing upward.
2
Tune in the broadcast station.
(See page 9.)
3 Press @
to start recording.
> PLAY is also depressed with @ (REC).
5
(e)
$
:
To stop the recording:
Press B/& STOP/EJECT.
To stop the recording temporarily:
Press II PAUSE.
To resume recording, press Il PAUSE again.
To reduce noise while recording an AM broadcast (Beat
proof function):
Press FM MODE/BP when recording or in the recording standby mode.
Each time you press the button, "bP1" and "bP2" will be displayed
alternately. Select the position with the least noise.
Recording from CDs D
1
Press M/A STOP/EJECT and load the tape.
Load the tape with the side to be recorded facing upward.
2
Press 4 CD OPEN and insert the CD.
EJ Press GD), then press B CLEAR after the track
number has been displayed.
The total number of tracks and total play time of the CD are
displayed.
4
Press @
to start recording.
» PLAY is also depressed with @ (REC).
CD play starts simultaneously.
To stop the recording:
Press
W CLEAR and @/4 STOP/EJECT.
Recording favourite tracks
Program desired tracks (refer to steps 2 to 4 on page 11) after
step 3.