Panasonic SA-AK48 Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SA-AK48. Panasonic SA-AK48 32 pages. Cd stereo system model no. sc-ak48
Also for Panasonic SA-AK48: Operating Instructions Manual (33 pages)
Print Page
A
B
1
2
4
1
2
CLOCK
TIMER
3
TUNE TIME ADJ
4
CLOCK
TIMER
10
RQT5321
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for four minutes.
This function does not work if the source is tuner or AUX.
Press [AUTO OFF].
"AUTO OFF" is shown on the display.
To cancel
Press [AUTO OFF] again to clear "AUTO OFF" from the display.
For your reference
The setting is maintained even if the unit is turned off. When the unit is
turned on again, "AUTO OFF" is displayed and the unit functions as
described above.
"AUTO OFF" disappears from the display if either tuner or AUX is
selected as the source but continues to function normally.
"AUTO OFF" remains displayed if CD or tape is selected as the source.
DISPLAY
DEMO
This is a 24-hour display clock.
3
This example in the figure shows how to set the time for 16:25
(4:25 p.m.).
To display the time when system is ON
Press [CLOCK/TIMER] to select "CLOCK".
TUNE TIME ADJ
At ECO mode on, to display the time when system is OFF
Press [-DISPLAY/–DEMO].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Auto-off function
A
by remote control only
Note
Setting the time
B
Press [f f f f f / 7 7 7 7 7 ] to switch on the system.
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
PLAY
REC
Previous display
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.