Panasonic SA-DT310 Operating Instructions Manual - Page 28
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SA-DT310. Panasonic SA-DT310 40 pages.
Print Page
Sound field
SLEEP
DOUBLE
RE-MASTER
DOUBLE
RE-MASTER
GROUP
REPEAT/
MIX 2CH
PLAY MODE/
P.MEMORY CANCEL
TOP MENU
DIRECT
NAVIGATOR
3, 4, 2, 1
ENTER
DISPLAY
TV VOL s
MUTING
C.S.M
FL DISPLAY AUDIO ONLY C.FOCUS
AUDIO ONLY
FM MODE
SETUP
Sound Field Control
Press [SFC] to select a setting.
Each time you press the button:
HEAVY:
Adds impact to rock.
CLEAR:
Clarifies higher sounds.
SOFT:
For background music.
HALL:
Expands sound to make you feel like you were in a hall.
MANUAL: ➡ below
FLAT:
Canceled (no effect is added) (factory preset).
In MANUAL
You can select LOW, MID, or HIGH, and then adjust them in a range
between – 3 and i3.
1 Press and hold [SFC] until the setting appears.
2 Press [2, 1] to select LOW, MID, or HIGH.
3 Press [3,4] to choose a level between – 3 and i3.
Repeat steps 2 and 3 to adjust the sound quality to your taste.
Center Focus
(Discs where the dialogue is recorded in the center channel)
You can make the sound of the center speaker seem like it is coming
from within the television.
Press [C.FOCUS].
CF
Each time you press the button:
CENTER FOCUS (ON)()OFF
≥This will have less effect when Dolby Pro Logic II is turned on.
≥This feature does not work for some discs.
28
RQT6924
All manuals and user guides at all-guides.com
AV SYSTEM
TV
VCR
AUX
EXT
TV/AV
TUNER
DVD
BAND
CD
1
2
3
4
5
6
7
8
9
--
S10/-
/
0
SKIP
SLOW/SEARCH
CH
MENU
PLAY LIST
ENTER
RETURN
TV VOL r
VOLUME
SUBWOOFER
SUBWOOFER
LEVEL
C.S.M
PL
LEVEL
SFC
SFC
RDS
C.FOCUS
CH SELECT
TEST
DELAY TIME
DELAY TIME
SFC
Custom Sound Memory — Store
the sound settings
[DVD-A] [DVD-V]
[VCD][[CD]]
Store the sound settings for a disc so the unit recalls them the next
time you play it.
≥Number of discs: 30
≥Settings: Dolby Pro Logic II, Subwoofer level, Center focus, Sound
filed control
∫ Storing the settings
1 Make the settings.
2 Press and hold [C.S.M].
∫ Recalling the settings
The unit recalls the settings when you play the disc again.
To check the settings
While the CSM indicator is on
Press and hold [C.S.M].
The settings appear for a few seconds each.
≥The settings are replaced if you change them.
≥When you store settings for a 31st disc, the earliest settings disap-
pear.
≥Press [C.S.M] while "CSM" is lit and the settings return to those that
were on before you stored the settings.
≥Press [C.S.M] while "CSM" is out and you are playing a disc for
which you stored settings and those settings are recalled.
Changing the delay time of the AV
control receiver
Adjust speaker delay for input
from external sources, such as
Dolby Digital from a digital
receiver or Dolby Pro Logic II
from a video cassette player.
Adjust the delay time for the
DVD/CD player in the SETUP
menus (➡ page 33).
1 Press [DELAY TIME].
Each time you press the button
Sch()Cch
"Cch" appears only when using the optical cable for receiving
Dolby Digital (➡page 34).
2 Press [3,4] to adjust.
Values
If distance a or b is greater than or equal to distance c, set to "0".
If distance a or b is less than distance c, set as follows.
a Center speaker
(When Dolby Digital is being
received)
Difference
Setting
15– 45 cm
1 ms
46– 75 cm
2 ms
76– 105 cm
3 ms
106– 135 cm
4 ms
136– 165 cm
5 ms
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
E.g., the setting for MUSIC is the same as that for Dolby Digital.
Dolby Digital
Dolby Pro Logic II
MOVIE
MUSIC
CSM
L
R
C
SW
a
c
b
RS
LS
b Surround speakers
Difference
Setting
75– 225 cm
5 ms
226– 375 cm
10 ms
376– 525 cm
15 ms
0 ms
5 ms
10 ms
15 ms
10 ms
15 ms
20 ms
25 ms
0 ms
5 ms
10 ms
15 ms