DIAQUIP QFS-1200 Operator's Manual - Page 6

Browse online or download pdf Operator's Manual for Saw DIAQUIP QFS-1200. DIAQUIP QFS-1200 12 pages. Electric floor saw

Print Page

2. CUTTING OPERATION

2.2)

Working with the electrical working forward feed

As a rule, moving the machine to the cutting position shall be done by pushing the machine,

without the electrical working feed. The working feed is thought only for cutting.

A DC-Motor, 24 volts and 100 watts, drives the machine over two rubbing wheels for the rear

axle about a gear train. The forward working feed speed is adjustable electronically by a

potential converter 01. The potential converter permits to adjust the working feed speeds step

less between 0 and 12 m per minute.

The switching On / Off of the pushing forward working feed is carried out via the feed lever 02.

2.2.1) Depth adjusting

Adjusting the desired cutting depth is carried out with the threaded spindle. To prevent a altering

the easy common spindle stand-alonely becomes-show the pin 04 occurred at the hand crank.

A adjustable depth display on the left side on the machine shows the respective cutting depth.

According to the saw blade diameter lower the saw by using the hand crank 05 so that the saw

blade touching the ground. Now putting the cutting the indicator on the scale on zero.

/06