Panasonic SCEN53 - DESKTOP CD AUDIO SYS Operating Instructions Manual - Page 10

Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SCEN53 - DESKTOP CD AUDIO SYS. Panasonic SCEN53 - DESKTOP CD AUDIO SYS 16 pages. Cd mini system
Also for Panasonic SCEN53 - DESKTOP CD AUDIO SYS: Operating Instructions Manual (21 pages)

Print Page
Panasonic SCEN53 - DESKTOP CD AUDIO SYS Operating Instructions Manual

The radio: manual tuning

2
1
Press [TUNER/BAND] to select "FM" or "AM".
The unit comes on.
Every time you press the button:
FM ↔ AM
2
Press [TUNING MODE] to select "MANUAL".
Every time you press the button:
MANUAL ↔ PRESET
Press [g/ ∂ ∂ ∂ ∂ ∂ ] or [µ µ µ µ µ / f] to select the frequency of
3
the required station.
4
Adjust the volume.
Auto tuning
Press and hold [g/∂] or [µ/f] for a moment until the frquency
starts changing rapidly. The unit begins auto tuning, stopping when it
finds a station.
•
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [g/∂] or [µ/f] once again.
To improve reception
Extend the whip antenna and adjust its direction.
If noise is excessive in FM
Remote control only
Press [PLAY MODE] to display "MONO".
This mode improves sound quality if reception is weak, but broadcasts
will be heard in monaural.
Press [PLAY MODE] again to cancel the mode.
"MONO" goes out. MONO is also cancelled if the frequency is changed.
Turn off "MONO" for normal listening. Stereo and monaural broad-
casts are automatically played as they are received.
FM allocation setting
Main unit only
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Preparation:
Press [TUNER/BAND] to select "AM".
Press and hold [TUNER/BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency. If
you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
•
After changing the "allocation" setting, the frequencies you previously
preset in the memory will be cleared.
10
RQT6734
CL CLOCK
CK
TIMER
TIMER
ON/OFF
ON/OFF
TIMER ADJ
TIMER ADJ
DISP
DISPLAY AY
SLEEP PGM/
SLEEP
PGM/–CLEAR
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER
PLAY MODE
PLAY MODE
PLAY MODE
1
CD
CD
AUX
AUX
TUNER/BAND
TUNER/BAND
TUNING MODE
TUNING MODE
VOLUME
VOLUME
3
4

The radio: preset tuning

Up to 12 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select "FM" or "AM".
CLEAR
1
Manual pre-setting
Remote control only
Pre-set the stations one at a time.
1 Press [PGM/–CLEAR] then press [g/ ∂ ∂ ∂ ∂ ∂ ] or [µ µ µ µ µ / f]
to tune to the required station.
2 Press [PGM/–CLEAR] then press [g/ ∂ ∂ ∂ ∂ ∂ ] or [µ µ µ µ µ / f]
to select a channel.
3 Press [PGM/–CLEAR].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1
Press [TUNING MODE] to select "PRESET".
2
Press [g/∂ ∂ ∂ ∂ ∂ ] or [µ µ µ µ µ /f] to select the channel.
3
Adjust the volume.
CL CLOCK
CK
TIMER
TIMER
TIMER ADJ
TIMER ADJ
ON/OFF
ON/OFF
DISPLAY AY
DISP
SLEEP
SLEEP
PGM/–CLEAR
PGM/
CLEAR
PGM/–CLEAR
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER PLAY MODE
PLAY MODE
AUX
AUX
TUNER/BAND
TUNER/BAND
CD
CD
TUNING MODE
TUNING MODE
2
g/∂, µ/f
VOLUME
VOLUME
3