Panasonic SCPM11 - CD STEREO SYSTEM Operating Instructions Manual - Page 16
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SCPM11 - CD STEREO SYSTEM. Panasonic SCPM11 - CD STEREO SYSTEM 28 pages. Panasonic cd stereo system operating instructions
Also for Panasonic SCPM11 - CD STEREO SYSTEM: Operating Instructions Manual (29 pages), Operating Instructions Manual (32 pages), Operating Instructions Manual (28 pages)
Print Page
A
B
2
1
1
2
3
16
RQT5706
TUNE
REW/3
CLEAR
FF/4
MODE
MUTING FM MODE/BP REV MODE
SOUND EQ
PRGM
TUNE
REW/3
CLEAR
FF/4
MODE
MUTING FM MODE/BP REV MODE
SOUND EQ
3
Preset channel
Presetting radio broadcasts
by remote control only
There are two methods of presetting stations.
Automatic presetting : All the stations the tuner can receive are
preset.
Manual presetting
: You can select the stations to preset and the
order they are preset in.
Up to 12 stations each can be set in the FM and AM bands.
Automatic presetting
A
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (z page 15).
Press and hold [PROGRAM].
Release the button when frequency begins to change.
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned
in.
Manual presetting
Preset the stations one at a time.
1 Press [TUNER] to select "FM" or "AM".
2 Press [PROGRAM] then press [g, REW/3] or
[f, FF/4] to tune to the require station.
3 Press [PROGRAM] then press [g, REW/3] or
[f, FF/4] to select a channel.
4 Press [PROGRAM].
The station occupying a channel is erased if another station is preset
in that channel.
B
Selecting channels
Press [TUNER] to select "FM" or "AM".
The unit comes on automatically.
Every time you press the button:
FM G AM
Press the numbered buttons to select the channel.
• To enter channel 10 or over.
Press [j], then the two digits.
Adjust the volume.
On the main unit
1 Press [TUNER/BAND] to select "FM" or "AM".
2 Press [TUNE MODE] to select "PRESET".
3 Press [g/REW/3] or [4/FF/f] to select the preset channel.