Panasonic SCPM25 - CD STEREO SYSTEM Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SCPM25 - CD STEREO SYSTEM. Panasonic SCPM25 - CD STEREO SYSTEM 28 pages. Cd stereo system
Print Page
3
2
1
POWER
2
TUNER/BAND
3
TUNE MODE
4
4/REW/ g 3/FF/ f
5
VOLUME
DOWN
A
CLOCK
AUTO OFF SLEEP
TIMER
PLAY
1
2
3
REC
4
5
6
10
7
8
9
0
TUNE MODE
PROGRAM
CANCEL
PLAY MODE
SELECTOR
TUNER
TAPE
CD
CLEAR
REW
FF
10
RQT5717
1
TUNED
ST
UP
TUNE MODE
TUNED
MONO
The radio: manual tuning
1
Press [POWER
2
Press [TUNER/BAND] to select "FM"
or "AM".
Every time you press the button:
FM W AM
3
5
Press [TUNE MODE] on the remote
control to select "MANUAL".
4
Every time you press the button:
MANUAL W PRESET
4
Press [4 4 4 4 4 /REW/ g] or [3 3 3 3 3 /FF/ f] to
select the frequency of the required
station.
"TUNED" is displayed when a radio station is tuned.
"ST" is displayed when a stereo FM broadcast is being
received.
5
Adjust the volume.
Auto tuning
Press and hold [4 4 4 4 4 /REW/ g] or [3 3 3 3 3 /FF/ f] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
• Auto tuning may not function when there is excessive interference.
MHz
• To cancel auto tuning, press [4 4 4 4 4 /REW/ g] or [3 3 3 3 3 /FF/ f] once
again.
A
If noise is excessive in FM
by remote control only
Press and hold [TUNE MODE] to display "MONO".
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [TUNE MODE] again to cancel the mode.
"MONO" goes out. MONO is also canceled if the frequency is
changed.
Turn off "MONO" for normal listening. Stereo and monaural
MHz
broadcasts are automatically played as they are received.
FM allocation setting
Main unit only
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
dB
Press and hold [TUNER/BAND]. After a few seconds, the display
will change to a flashing display of the current minimum FM
frequency. If you continue to hold the button down, the minimum
frequency will change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
• After changing the "allocation" setting, the frequencies you
MHz
previously preset in the memory will be cleared.
• Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
] to turn the unit on.