Panasonic SCPM41 - MINI HES W/CD PLAYER Operating Instructions Manual - Page 15
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic SCPM41 - MINI HES W/CD PLAYER. Panasonic SCPM41 - MINI HES W/CD PLAYER 20 pages. Cd stereo system model no. sc-pm41
Also for Panasonic SCPM41 - MINI HES W/CD PLAYER: Operating Instructions Manual (20 pages)
Print Page
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or an aux
source (record timer).
Turn the unit on and set the clock.
Timer
Action
Play timer
Prepare the music source you want to listen to;
tape, CD number (1~5), radio or AUX, and set the
volume.
Record timer
Check the cassette's erasure prevention tabs
(refer page 12), insert the cassette and tune to
the radio station (refer page 13) or select the aux
source (refer page 16).
Press [CLOCK/TIMER] to select your desired timer.
1
Each time you press the button:
CLOCK
Original display
Within 7 seconds, press [4/REW/ 4] or [3/FF/¢]
2
to set the starting time.
Play timer indicator
Record timer indicator
Press [CLOCK/TIMER] to confirm.
3
4
Repeat steps 2 to 3 to set the fi nishing time.
To activate the timer
Press [˚PLAY/REC] to turn on your desired timer.
5
˚ PLAY
˚ REC
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
˚ PLAY
˚ REC
Start time
Finish time
no display (off)
To enjoy the desired source after the timer setting is
completed.
The volume level (for play timer) and music source are stored
in the timer memory and the timer will start in these preset
conditions. However, the CD numbers do not get stored in
the timer memory.
1. After step 5, start playing the desired source.
2. Reset the CD numbers if you have changed any of them,
confi rm that a CD or cassette is inserted, then press [y] to
put the unit on standby.
Other basic operations
Other basic operations
To
Action
change the settings
Repeat steps 1 to 4 and 6 on the left.
change the source
1) Press [˚PLAY/REC] to clear the timer
or volume
indicator from the display.
2) Make changes to the source or
volume.
3) Do steps 5 to 6 as on the left.
check the settings
Press [CLOCK/TIMER] repeatedly to
(when the unit is in
select ˚PLAY or ˚REC.
standby mode)
cancel
Press [˚PLAY/REC] to clear the timer
indicators from the display.
• Play timer and record timer cannot be used together.
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time everyday if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If AUX is selected as the source, when the timer comes on, the
system turns on and engages AUX as the source. If you want to
playback or record from a connected unit, set the other unit's timer
to the same time. (See the other unit's instruction manual.)
15
RQT8038