HTC 2Q9U100 Instructions - Page 2

Browse online or download pdf Instructions for Cell Phone HTC 2Q9U100. HTC 2Q9U100 2 pages. Inserting nano sim and microsd cards

Print Page

HTC Desire 20+

___

Inserting nano SIM and microSD cards

IMPORTANT:

Use a standard nano SIM only.

Don't cut a larger SIM card to fit. It's thicker than a standard

nano SIM card and may get stuck in the slot.

Don't disassemble any part of the phone.

Don't try to open the phone or remove the battery by force. This

may damage the phone or its electronics and will invalidate the

warranty.

Don't throw the tray away.

You need it to insert your nano SIM and microSD™ cards.

cut-off

corner

cut-off

corner

1. With the phone facing up,

insert the tip of the tray

eject tool that came in

the box (or a small bent

paperclip) into the tray

eject hole.

Push the tip into the hole

until the tray ejects, and

then pull the tray out.

2. With the gold contacts

facing down, place your

nano SIM cards into the

SIM 1 and SIM 2 holders

of the tray. Make sure to

align the cut-off corners

to the notches on the

holders.

Note: Both SIM1 and

SIM2 cards can be 4G

LTE cards. To find out

how to set the preferred

card for your mobile data

connection, see the user

guide.

___

Restarting the phone

To restart your phone when it freezes, press and hold the

POWER button for 12 seconds until the phone vibrates. Then,

release your finger.

___

Need help?

Go to www.htc.com/support/ to find the user guide, how-to

articles, and more. Please also read the Safety and regulatory

guide that's included in the box.

HTC and the HTC logo are

trademarks of HTC Corporation.

microSD is a trademark of SD-3C LLC.

All other company, product and

service names mentioned herein are

trademarks, registered trademarks

or service marks of their respective

owners.

htc.com

3. When you need to use

your microSD card,

remove your second

nano SIM card. Place

the microSD card on the

SIM 2/SD holder with the

gold contacts facing down

and narrow side facing

in. Both cards can't be

inserted at the same time.

4. When reinserting the tray,

make sure it is facing up

so that the cards don't

fall out. With the outer

card holder between your

fingers, steadily slide the

tray all the way into the

slot.