HTC 400 DS User Manual - Page 9

Browse online or download pdf User Manual for Floor Machine HTC 400 DS. HTC 400 DS 38 pages.

Print Page

Introduction

HTC 400 DS

1. Introduction

HTC 400 DS is a grinder that can be used to grind, strip, clean and

polish concrete, natural stone and terrazzo floors. The machine's

area of application depends on the choice of tool.

Read the manual carefully so that you are totally familiar with

the machine before you start using it. Contact your local retailer

for further information. For contact information, see Contact

Information at the start of the manual.

Even though every effort has been made to make this manual as

complete and accurate as possible, we bear no responsibility for

incorrect or missing information. HTC reserves the right to change

descriptions in this manual without giving prior notice.

This manual is protected by the Copyright Act and no part of

it may be copied or used in any other way without the written

approval of HTC.

In addition to the general functions, this manual deals with the

areas of application and the maintenance of the grinder.

1.3.1. Safety instructions – Explanation of symbols

A number of symbols are used in the manual to highlight the most

important sections, see below. In order to avoid both personal

injury and material damage as far as possible, it is extremely

important to read and understand the text next to these symbols

particularly carefully. There are other symbols indicating practical

tips. These are to help you use the machine in the easiest and most

effective way.

The following symbols are used in the document to indicate where

special attention is needed.

2.0