HTC 650 HDX User Manual - Page 33

Browse online or download pdf User Manual for Floor Machine HTC 650 HDX. HTC 650 HDX 48 pages.
Also for HTC 650 HDX: Manual (40 pages)

Print Page

HTC 650 HDX

Note!

As long as the emergency stop switch (EM-Stop) is pressed in, the

machine cannot be started. Reset by turning the switch 45°, so it

pops out again. The machine can then be restarted.

4.8.3. Starting the machine

For a description of the control panel, see Figure 3-3 on page 12.

If the machine is using too much power, the Overload indicator

on the control panel goes lights. The machine switches off

automatically after a while, if this is ignored. Reduce the speed of

the grinding discs, to see if the Overload indicator goes out. If this

does not help, follow the procedure for troubleshooting.

Tip!

If the machine is heavy to operate, it can be due to the placing

of the weights. Fold the weights up or back, to unload the

grinding head, see Figure 4-4 on page 18 and Figure

4-5 on page 19.

1.0

Make sure the emergency stop switch is not activated.

Insert the cable.

Start the dust separator, if dry grinding is to be done.

Turn the key to the right "On".

Start the grinding discs rotating, by turning the knob to

"Start".

Set the speed for the grinding discs, using the Speed knob.

The machine has now started.

Usage