Bioness Vector base Clinicians Manual - Page 10
Browse online or download pdf Clinicians Manual for Medical Equipment Bioness Vector base. Bioness Vector base 18 pages.
Print Page7. Tighten side straps on lower abdominal support.
8. If necessary adjust side vertical straps.
9. Wrap leg supports around the upper thigh and secure the Velcro.
10. If necessary adjust side vertical straps attached to the leg supports.
11. Adjust shoulder straps to the desired length.
D-Ring
Side Vertical Straps
Side Straps
Side Vertical Leg Straps
Leg Supports
Attaching a Patient Harness to the Spreader Bar
After a patient harness has been securely placed and adjusted on the patient, the harness will need
to be attached to the Spreader Bar.
1. The Spreader Bar provides three attachment points to attach a patient harness. The selection of
the attachment point depends on the width of the patient. Connect the carabiner that is attached
to the rope pulley to the outermost attachment points for wide patients, and to the innermost
points for narrow patients. See Figure 3-2.
2. Release the rope pulley lever to lower the side of the rope with the attached carabiner.
3. Connect the carabiner to the D-ring on the patient harness shoulder strap.
Clinician's Guide
6
Figure 3-1: Patient Harness Features
Shoulder Straps
Top Torso Support
Upper Abdominal Support
Lower Abdominal Support