Dickson TK180/500 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Data Loggers Dickson TK180/500. Dickson TK180/500 9 pages.

Print Page

Product Specifications

Temperature Range: SK180: +40 to +110°F (0 to +43°C)

SK500, TK180/500: -4 to +158°F (-20 to +70°C)

Temperature Accuracy: SK180/TK180: ±1.2°F

Humidity Range (TK180/500): 0 to 95% RH

Humidity Accuracy (TK180/500): ±2% over range 10 to 90% RH

Data Capacity: 7,936 Sample Points

Sample Interval: Variable from 10 sec. to 24 hours in 10 sec. increments

Battery Type/Life: Lithium 3V, approximately 1 year

Response Time: 10 minutes to 63% of full scale

Download Time: 30 sec., typical with logger full

Approvals: CE

Enclosure: Polycarbonate

Memory: EEPROM

Dimensions: 1.35" x 1.1" x 0.485" (3.43 x 2.79 x 1.23 cm)

Weight: 0.44 ounces (12.4 grams)

Includes: 3V Lithium battery

Minimum DicksonWare Version Required: 7.50

Getting Started

• Install the DicksonWare™ Software.

• Connect the cable (supplied with the software) to the logger and to a working serial port on your

computer.

• Click the Setup button. When the setup window appears, all fields should be automatically filled

in, this will confirm that DicksonWare™ has recognized the logger. Press the Clear button. This

will delete all data currently stored.

• The logger is now sampling and ready for use. The default sample interval is 1 minute. You may choose

to change Default settings for sample interval and start-date and time. When changing these settings,

the logger will automatically go through the clear process to accept your changes.

NOTE: To conserve battery life when storing unit, press the Setup button and select the shortest Sample

Interval and Stop When Full in the Samples section or remove the battery.

Rev. 05/05

SK500/TK500: ±1.8°F (±1°C) over range -4 to +158°F (-20 to +70°C)

03030901