Dickson TH6P2 Getting Started

Browse online or download pdf Getting Started for Voice Recorder Dickson TH6P2. Dickson TH6P2 7 pages. Remote sensing temperature/humidity recorder

Print Page

DICKSON

DICK

GETTING STARTED

7-day chart rotation

0 to 100

+32 to 100F (TH6P1/2)

QUICK START

1. 1. 1. 1. Remove the protective pen caps.

2. 2. 2. 2. Connect Sensor: TH6P1/2: Make sure the R200 replaceable sensor is connected firmly to

3. 3. 3. 3. Insert 4AA batteries and plug in AC adapter (See Figure 3). Unit will power on.

4. 4. 4. 4. The instrument will move pens to the appropriate readings.

5. 5. 5. 5. Install the chart that matches selected Dip Switch settings (See p.4).

6. 6. 6. 6. Set the appropriate time. There are two ways to adjust the chart and set the appropriate

Dickson TH6P Manual V5 052418

1.800.561.8187

SON

F (TH6P3)

the recorder. TH6P3: Make sure the R250 sensor is connected firmly to the 10' extension

cable and the extension cable in plugged in firmly to the recorder.

Press the PEN

PEN

PEN HOME

PEN

HOME

HOME key to move the pens to the outside of the chart. The pens are

automatically raised off the chart.

Remove the old chart, place the new chart on the Chart Hub being certain that the edge

of the chart slides under the Chart Guide Clip located at the outside of the chart.

time:

Set the chart time manually by inserting a coin into the groove in the chart hub

and turning clockwise until the correct hour (and day if applicable) on the chart is

referenced to the timing arrow (just to the right of the pens tip on the dial). Press

Pen

Pen Home

Home to move the pens back onto the chart.

Home

www.

T T T T H H H H 6P1 /

Remote Sensing Temperature

Remote Sensing

Temperature/Humidity

Remote Sensing

Temperature

[email protected]

.com

6P1 /

6P1 / TH6

6P1 /

TH6P2 /

TH6

P2 /

P2 / TH6P3

P2 /

TH6P3

/Humidity Recorder

Recorder

/Humidity

Recorder