Alpha Moisture Systems PSS User Manual - Page 8

Browse online or download pdf User Manual for Samplers Alpha Moisture Systems PSS. Alpha Moisture Systems PSS 17 pages.

Print Page

PSS - Portable Sample System - User Manual

2 Quick Start Guide

Below is a general guide to get started, but first, ensure that the PSS is located

on a flat, level, dry and non-slip safe surface, close to the sample point (gas

source).

For faster results we recommend the sampling line to be as short as possible to

reduce purging time. Please read this section carefully and understand it.

2.1 Connect the SADPmini2 or SADPmini dewpoint meter to the PSS using the

appropriate connecting tubes supplied, and ensure a gas tight seal on both

sides of the instrument. Fig 2.

The user will need a 9/16" (or 14mm) open ended wrench size and a 5/8" (or

16mm) holding wrench to prevent rotation of the bulkhead fittings.

Fig 2.

Installing the SADPmini2 into the PSS

The Head of the SADPmini2 must be in the down closed position at this stage. Fig 3.

2.2 Ensure that (if fitted) the Pressure Regulator Valve is turned fully anti-clockwise and is

fully closed. Fig 4. On next page.

If a Needle Valve is fitted, then ensure that this is fully closed by turning fully clockwise.

Fig 5. On next page.

Fig 3.

Ensure the SADPmini2 head is down fully