3Com 3CNJ1000 - IntelliJack Gigabit Switch Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Switch 3Com 3CNJ1000 - IntelliJack Gigabit Switch. 3Com 3CNJ1000 - IntelliJack Gigabit Switch 16 pages. 3com intellijack nj1000: quick start

Print Page

1. Quick Start Guide

One Class 1 PD device and One Class 2 PD device

■

CAUTION: You must use only a power supply that is provided or approved by 3Com

for use with this NJ1000. Failure to comply with this requirement may result in

damage to the NJ1000, or may result in a hazardous situation or personal injury.

3. Plan the Installation

When installed, the back of the NJ1000 extends into a wall for 0.5 inches. Because

the depth of some wall openings differs, observe the following requirements and

recommendations before you install the NJ1000:

Make sure that the wall opening where the NJ1000 is being installed complies

■

with the NEMA-WD6 standard, as described in this diagram:

Make sure that the distance between the back of the NJ1000 and the inside of

■

the wall is at least 1.5 inches (3 inches is recommended).

1.750"

(44.45mm)

2.8125"

(71.44 mm)

Screw holes

3.28125"

(83.31mm)

reference