Alpha Professional Tools ECC-KIT Technical Notes - Page 4
Browse online or download pdf Technical Notes for Cutter Alpha Professional Tools ECC-KIT. Alpha Professional Tools ECC-KIT 4 pages. Dry tile cutting system
●
Make sure the ECC-125 is connected to the "stabilizer" when assembled to the table. The stabilizer will assure the
Ecocutter will make consistent 90 degree cuts.
●
Make sure the inner belt and outer belt is functioning correctly. These belts drive the pulleys for the fan exhaust that
forces the air flow into the dust bag.
●
Take care to ensure that the cutting area is clear of debris and no one will be in a position to interfere with the
cutting application.
●
Before beginning your cut, allow the tool to run for 15 seconds to inflate the dust bag.
●
Attach side handle for better stability during cutting applications.
●
When transporting your table between jobs, don't place items on top of the rails as it may damage the rails.
●
The ECC-125/225 (Ecocutter), dust bag & hose can be used stand-alone for grout removal, concrete profiling, etc.
●
Have an extra set of belts (inner and outer) on hand.
●
Refer to the Alpha® Ecocutter Dry Tile Cutting System Instruction Manual for proper setup and usage.
●
Read and follow the instructions in the operating manual thoroughly.
Reference
For more product information, visit us on the web at www.alpha-tools.com.
Document # 6030 - Rev.-November 2010
www.alpha-tools.com
Page 4 of 4