DieHard 200.71231 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Battery Charger DieHard 200.71231. DieHard 200.71231 16 pages. Battery charger 50/15/2 amp manual engine starter with battery tester 225/125 amp
Also for DieHard 200.71231: Owner's Manual (14 pages)
Print Page
.
Tap the other axle cap onto the opposite end of
the axle and place the axle assembly onto the
bottom of the charger. Place one end of the
bracket into slot, then place the axle assembly
under each bracket. Fasten the other side of the
brackets using the two 10-32 screws provided.
To attach
the
handle:
Turn the charger right side up onto its foot and wheels.
Remove the two top screws from each side of the
charger and align with the screw holes on the handle.
Attach the handle using the same screws.
Plugging
it in
Your charger should be grounded to reduce the
risk of electrical shock.
Your charger is equipped with an electrical cord that
has an equipment grounding conductor and a ground-
ing plug designed to be used on a 120 volt circuit. The
plug must be plugged into an outlet that has been
properly installed and grounded in accordance with all
local codes and ordinances.
5