DieHard 200.71240 Operator's Manual - Page 8
Browse online or download pdf Operator's Manual for Battery Charger DieHard 200.71240. DieHard 200.71240 18 pages. Battery charger 50/15/2 amp, 6/12 volt, manual 250 amp engine starter
Also for DieHard 200.71240: Operator's Manual (19 pages)
Print Page
8.1 Forallgrounded c ord-connected
battery chargers:
• GROUNDING AND AC POWER CORD CONNECTION
INSTRUCTIONS
- The charger should be grounded to reducethe
risk of electric shock.
The charger is equipped with an electric cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
.
8.2
• DANGER - Never alterthe AC cord or plug provided -_ if it will hot fit
the outlet, have the proper outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock.
For all grounded, cord-connected
battery chargers with an input rating less
than 15-amperes and intended for use on a nominal 120-volt circuit:
• This battery charger is.for use on a nominal 120-vott circuit, add has a
grounding plug that looks like the plug illustrated in sketch A in Figure 8.4..
A temporaryadai3tor,
which looks like the adapter illustrated in sketches-
B and C, maybe used to connect this plug to a two-pole receptacle.as
shown in sketch B if a pi'operty grounded outlet is not available. The tem-
porary adapter should be used only until a properly grounded outlet can
be instal ed by a qualified electrician.
• DANGER - Before using an adapter as illustrated, be certain that the
center screw of the outlet plate is grounded. The green-colored
rigid
ear or lug extending from the adapter rnust be connected to .a properly
grounded outlet-
make certain it is grounded. If necessary, reptace the •
original outlet cover plate screw with a longer screw that wilt secure.the
adapter ear or lug to the outlet cover plate and make a ground connec-
tion to the grounded outlet•
,6,