DieHard Portable Power 950 Owner's Manual - Page 5
Browse online or download pdf Owner's Manual for Remote Starter DieHard Portable Power 950. DieHard Portable Power 950 9 pages. 12v dc power source and jump starter
Also for DieHard Portable Power 950: Operator's Manual (9 pages), Operator's Manual (9 pages), Operator's Manual (13 pages), Operator's Manual (7 pages)
Print Page
3,
If the 12V DC device draws more than
15A, the internal circuit breaker of the
Portable Power 950 wilt momentarily
disconnect power to the device. If this
occurs, unplug the device and the
circuit breaker will automatically reset
after several seconds.
4,
Charge the Portable Power 950 as
soon as possible after each use.
Because the DC power outlet is in-
ternally wired directly to the internal
battery, extended operation of a 12V
DC device may result in excessive
battery drain.
12V DC ELECTRICAL
DEVICE
EXAMPLE
RUN=TIME
CHART
Appliance Type
Estimated Wattage
Estimated Time*
Fluorescent
Lights, Cellular Phones
Radios, Depth Finders, Fans
Camcorders,
DVD Players, Spotlights
Electrical
Tools, Bilge Pumps
Electric
Coolers
Air Compressors,
Car Vacuums
4 Watts
40 Hours
9 Watts
21 Hours
15 Watts
12 Hours
24 Watts
7 Hours
48 Watts
3 Hours
80 Watts
1.5 Hours
are based on the internal
*NOTE: Estimated run-times. Actual time may vary. Times
battery being fully charged.
USING
THE BUILT=IN
LIGHT
1.
Position the 950 on a flat, stable sur-
face near the intended work area.
2.
Turn the Light/Display
switch to the
LIGHT position. The light will turn on
and illuminate your work area.
NOTE: With a fully charged internal bat-
tery, the built-in light should provide
18
to 26 hours of continuous
useful light,
depending on ambient conditions.
3.
Turn the Light/Display
switch to the
OFF position
when work is com-
pleted.
4.
Charge the 950 as soon as possible
after using the built-in light.
DiGiTAL
DISPLAY
FUNCTIONS
1.
Portable Power 950 - To check the
internal
battery's
status,
press the
display switch on the front of the 950.
The display wilt show the charge per-
centage of the internal battery.
2.
Vehicle - For the first 5 seconds, the
display shows the vehicle's battery
power level in a percentage.
3.
Vehicle and Portable Power 950 -
After 5 seconds,
the display blinks
and switches to show the combined
total starting power of the vehicle and
950 batteries.
You have 10 seconds to attempt to start
your vehicle from the time you turn your
key. You can crank
as many times as
necessary during these 10 seconds. After
that time, the clamps will shut off and there
wilt be no power available for one minute.
The display will first show a 10-second
countdown, then a 60-second countdown.
This cycle will repeat itself until there is no
power left in the Portable Power battery.
See Page 4 for further starting details.
CHARGING
iNTERNAL
BATTERY
This Portable Power 950 comes with a
sealed,
non-spitlabte
DieHard
mainte-
nance-free lead-acid battery. This internal
battery is specifically designed to deliver
high power jump-starting
as well as repeti-
tive deep cycling performance.
To charge the Portable Power 950 internal
battery: