Olympus 50 QD Instructions Manual - Page 6

Browse online or download pdf Instructions Manual for Digital Camera Olympus 50 QD. Olympus 50 QD 15 pages. Olympus instruction manual digital camera is-50, is-500

Print Page

TAKING PICTURES

— Focus Lock

If you want to position your main subject outside the center of the

frame, follow the procedure below (focus lock).

Autofocus frame

Position the autofocus frame on

your subject and press the

shutter release button halfway.

The camera beeps, and the

autofocus indicator lights in the

viewfinder. The exposure is also

locked at this time (AE lock).

UNLOADING THE FILM

The camera automatically rewinds the film when you reach the end of

a roll. You can also rewind the film before it reaches the end.

Make sure the motor has

stopped and that"

"is blinking;

then open the back cover to

remove the film.

Reframe your subject while

keeping the shutter release

button pressed halfway. Then

press the shutter release button

all the way.

Rewinding the film before the

end of the roll

Press the mid-roll rewind

button. Do not use an

instrument with a sharp tip.

FLASH PHOTOGRAPHY

Set the power switch to

to flip

up the flash. The camera will

recharge the flash, and the flash

will be ready to use. When there

is insufficient light, the flash fires

automatically.

Mode display

Flash mode

Automatically fires in the dark, with backlighting, or

Auto Flash

display

under fluorescent lighting.

Significantly reduces the phenomenon of "red-eye"

Red-Eye

(when a subject's eyes appear red in color

Reduction

photography).

Flash

Fill-In

Fires regardless of available light.

When

is blinking in the viewfinder, the flash is being recharged

(for about 0.2 to 4 seconds with fresh batteries.) and the shutter

cannot be released.

When the flash fires in the Programmed Auto (FULL AUTO) mode,

the shutter speed is automatically set at 1/100-sec.

When the shutter release button is pressed halfway, the autofocus

auxiliary light (flash) may flicker several times. Press the button

fully for main flash activation.

is blinking in the viewfinder when the flash is not flipped up,

use of the flash is recommended.

Do not fire the flash right in front of the eyes of people and

animals.

Do not point the camera at a motorist and fire the flash.

— Setting the Flash Mode

Press the

button to

select the flash mode. The

selected mode is displayed

on the LCD panel.

Function