Olympus C-5000Zoom Quick Start Manual

Browse online or download pdf Quick Start Manual for Digital Camera Olympus C-5000Zoom. Olympus C-5000Zoom 2 pages.
Also for Olympus C-5000Zoom: Basic Manual (48 pages)

Print Page

QuickStart Guide

C-5000ZOOM

START HERE

It is strongly recommended that you follow these step-by-step

numbered instructions to set up and quickly begin using your

new Digital camera.

For more detailed instructions on advanced features, please refer to

the printed Basic Manual included in your package, or the Reference

Manual on the CD-ROM.

PREPARING THE CAMERA FOR USE

Before you begin using your Olympus Digital camera...

Charging the battery (LI-10B)

The battery is not fully charged when purchased. Before use, be

sure to charge the battery with the specified provided charger (LI-

10C).

Make sure that the + and - terminals of the battery shown in the

illustration on the right are correctly oriented when loading the

battery into the charger.

Inserting the battery and xD-Picture card

1) Make sure the camera is turned off.

TURNING ON THE

CAMERA

The camera Mode dial is used to select the various

operation modes.

Turning the camera ON

• Remove the lens cap.

• Set the mode dial to h. Turn the power switch to the

ON position. The lens extends and the monitor turns on.

• To turn the camera off, turn the power switch to the OFF

position.

TIP

:To maximize battery life, the Digital camera features a

power saving mode in which the camera enters a sleep

mode after approximately three (3) minutes of non-use.

Setting the Date and Time

Set the date and time before using the camera for the

first time. This affects the way image file names are

created, and will conveniently include this information

with each picture.

• Set the mode dial to h and turn the power switch to

the ON position.

• Press e. The top menu is displayed.

• Press c to select X.

• Use ac to select the date format.

• Adjust the date and time in the appropriate fields by using

d to select the field, and ac to set the proper value.

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour

format.

• Press

to set the date and time and exit the menu.

VT575303

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville,

NY 11747-3157, U.S.A.

http://www.olympusamerica.com/support

Corrector terminals

2) Slide the battery/card cover in the direction of

A. The lock is released, and the battery

compartment cover opens in the direction of B.

(SHOOTING MODE)

Mode dial

Power Switch

(OPTIONAL)

Camera Settings in Shooting Mode as shown in Monitor

Flash intensity control

Self-timer/Remote Control

Note: Depending on the camera settings, not all indicators will be displayed.

UNPACKING THE BOX CONTENTS

Gather your Digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the camera

set-up procedures that follow.

Digital camera

Strap

The following items are also included in the Digital camera package: Basic Manual, video cable, RM-2 remote control, lens cap & string,

warranty card, registration card (not provided in some areas), and safety precautions booklet.

3) Orient the battery correctly, and insert it until it

is locked by the battery lock.

• To remove the battery, slide the battery lock in the

direction of the arrow. As the battery emerges,

hold it straight and pull it out completely.

5) Close the battery/card cover in direction C

Lithium ion battery

then slide it in direction D.

(LI-10B)

Attaching the strap and lens cap string

Attach the lens cap string and strap to the strap eyelets on each side of the camera as

illustrated. Attaching the strap to the camera makes it easier to handle.

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Strap eyelet

Zoom lever

Macro/Spot button

Protect button

Orange lamp

Viewfinder

Green lamp

Monitor

Exposure compensation

Shutter speed

Exposure differential

Shooting modes

Aperture value

Battery check

Green lamp

Flash stand-by

Macro mode

Noise reduction

Flash mode

Drive

Record mode

AF target mark

Resolution

Olympus Europa GmbH

Wendenstrasse 14-18,

20097 Hamburg, Germany

http://www.olympus-europa.com

Lithium ion battery (LI-10B)

CAMEDIA Master

Lithium ion battery charger (LI-10C)

CD-ROM

4) Face the card the correct way and insert it into

Battery lock

Shutter

button

Mode dial

Flash

Self-timer/Remote control lamp

Lens

Remote control receiver

Hot shoe

Flash mode button

Erase button

Card access lamp

AEL/Custom button

Rotation button

Arrow pad

Tripod socket

OK/Menu button

Camera Settings in Playback Mode as shown in Monitor

AE lock

AE memory

Battery check

Spot metering

ISO

White balance

compensation

Aperture value

Saturation

Sharpness

Shutter speed

Contrast

Memory gauge

Number of storable

still pictures

http://www.olympus.com/

USB cable

xD-Picture Card

(gray color)

the card slot.

• To remove the card, push the card all the

way in to unlock it. As it emerges, hold the

card straight and pull it out.

Index area side

Notch

USB connector

VIDEO OUT jack

DC-IN jack

Battery/Card cover

Print reservation,

Number of prints

Protect

Record mode

Resolution

Exposure compensation

White balance

ISO

Date and time

File number, Frame number

Playing time/total recording time

Printed in Japan