Olympus Camedia D-390 Quick Start Manual

Browse online or download pdf Quick Start Manual for Digital Camera Olympus Camedia D-390. Olympus Camedia D-390 2 pages. D-390 quick start guide - spanish (312kb)
Also for Olympus Camedia D-390: Quick Start Manual (2 pages), (Spanish) Guía De Inicio Rápido (2 pages), (Spanish) Guía De Inicio Rápido (2 pages)

Print Page

Olympus Camedia D-390 Quick Start Manual

QuickStart Guide

D-390 / C-150

START HERE

It is strongly recommended that you follow these

step-by-step numbered instructions to set up and

quickly begin using your new Digital Camera.

For more detailed instructions on advanced features, please refer

to the printed Basic Manual included in your package, or the

Reference Manual on the CD-ROM.

PREPARE THE CAMERA FOR USE

Before you begin using your Olympus digital camera...

Loading batteries

• Slide the battery compartment cover in the direction of

(the direction indicated by the

and lift it up in the direction of

• Insert batteries in the direction shown in the illustration.

There is a mark on the bottom of the

camera showing the correct way to insert

batteries.

TURNING ON THE CAMERA

All you need to do is slide the lens barrier open or closed to turn the camera ON or OFF.

Turn the camera ON

(SHOOTING MODE)

• Open the lens barrier.

• Close the lens barrier to turn the camera off.

Power on

Lens barrier

TIP: To

maximize battery life, this digital camera features a power saving mode in which the camera enters a sleep mode after

approximately three (3) minutes of non-use. Press the shutter button to wake up the camera.

Set the Date and Time

(OPTIONAL)

Although this is not required, it is recommended that you set the date and time. This affects the way image

file names are created, and will conveniently include this information with each picture. The date and time

can also be set when the camera is in the playback mode.

• Open the lens barrier fully until it clicks.

• Press

to display the menu.

• Press

to select MODE MENU.

• Press

three times to select SETUP.

• Press

once, and then

twice to highlight

• Use

to select the date format.

• Adjust the date and time in the appropriate fields by using

the proper value. Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour format.

• Press

twice to set the date and time and exit the menu.

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Strap eyelet

Card cover

Shutter button

USB

USB connector

Lens barrier

VT450901

All manuals and user guides at all-guides.com

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville,

NY 11747-3157, U.S.A.

http://support.olympusamerica.com/

mark on the cover),

Power off

, and then press

once.

to select the field, and

Flash

VIDEO OUT jack

Self-timer lamp

Lens

DC-IN jack (3.4V)

OLYMPUS OPTICAL CO. (EUROPA) GMBH

Wendenstrasse 14-18,

20097 Hamburg, Germany

http://www.olympus-europa.com

UNPACKING THE BOX CONTENTS

Gather your digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the

camera set-up procedures that follow.

Strap

Digital camera

The following items are also included in this package: Basic Manual, video cable, warranty card, registration card (not

pvovided in some areas), and safety precautions booklet.

• Close the battery compartment cover so that it pushes the batteries down inside. While pressing

the

mark, slide the cover in the opposite direction of

TIP:

An optional Olympus E-7AC AC adapter is available, and is recommended when downloading images to ensure a

consistent power supply. See the Basic Manual for more information.

Insert the xD-Picture Card

The xD-Picture Card is where the camera stores your pictures and is available in a variety

of memory capacities. The pictures you take with the camera remain on the xD-Picture

Card even when the camera is turned off and/or the batteries are removed.

• Insert the xD-Picture Card into the spring-loaded card slot as shown

in the illustration. Push the card fully into the slot. The card will lock

into place when fully inserted.

• To remove, push down on the xD-Picture Card. The card will pop up.

Pull to remove.

• Close the card cover.

Confirm you have installed the batteries and xD-Picture Card properly by

pressing

. The "No Picture" message should be displayed in the monitor.

Turn the camera off by pressing

Attach the strap

(OPTIONAL)

Attach the strap as illustrated to make the camera easier to handle.

Viewfinder

Monitor

Camera Settings in Shooting Mode as shown in Monitor

Battery check

to set

Flash mode

(still pictures only)

Record mode

Camera Settings in Playback Mode as shown in Monitor

Battery check

VIDEO OUT

DC IN 3.4V

Date and time

Connector cover

AA (R6) alkaline

CAMEDIA

USB cable

batteries (x2)

Master CD-ROM

(grey color)

again.

Orange lamp

AF target mark

Green lamp

Monitor button (QUICK VIEW

)

OK/Menu button

Playback button (

)

Tripod socket

Battery compartment cover

Shooting mode

Exposure compensation

+2.0

Macro

Self-timer

HQ 1600 x 1200

Number of storable still pictures/

Resolution (number of pixels)

seconds remaining for movies

Print reserveation

Number of prints

x 10

SIZE: 1600x1200

+ 2.0

'03.09.12 12:30

FILE: 100–0020

Note:

• Depending on the camera settings, not all indicators

will be displayed.

http://www.olympus.com/

xD-Picture Card

Arrow pad

Spot metering mode

White balance

AF target mark

Protect

Record mode

Number pixels

Exposure compensation

White balance

File number, Frame number,

Playing time/

Total recording time

Printed in China