Olympus Camedia D-510 Zoom Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Digital Camera Olympus Camedia D-510 Zoom. Olympus Camedia D-510 Zoom 2 pages. Olympus auto-connect software: connection guide
Also for Olympus Camedia D-510 Zoom: Connection Manual (9 pages)
C200ZOOM_QSG_E 7/3/01 7:37 PM Page 2
Confirm the Contents
Attach the Strap
Please check the contents of the box to confirm that you have all of the
accessories shown below. If any of these are missing or damaged,
please contact your point of purchase.
Camera
Dedicated USB
(Universal Serial Bus) cable
Strap
Video cable
Four AA (R6) alkaline batteries
Basic manual,
Quick Start Guide, Warranty,
Attach the strap to the camera as shown in the diagram.
User card (not included for
some regions)
SmartMedia card,
Anti-static card case, Labels (2),
Write-protect adhesive seals (4),
Instructions
Software CD-ROMs
(including reference manual,
the USB driver and other
necessary software)
Made in Japan
Made in Japan
Insert the Batteries and SmartMedia Card
Shoot the Picture
1.
1.
Make sure the lens barrier is closed.
Slide the lens barrier open until clicks.
Card cover
Battery
compartment cover
Lens barrier
Lens barrier
2.
5.
Slide the battery compartment
Open the card cover.
2.
Bring the camera into position and
lock from
to
. Slide the
look through the viewfinder.
battery compartment cover to
the side and lift it up to open.
3.
Press the shutter but-
6.
ton gently, and confirm
Insert the SmartMedia card
3.
Insert the batteries into the
the green lamp next to
into the camera as shown in
camera as shown in the dia-
the diagram, making sure
the viewfinder is illumi-
gram, making sure that the
that it is pushed all the way
nating.
negative and positive poles
in.
If the green lamp is blink-
are correctly aligned.
ing, it means the subject
is out of focus. If this is
the case, gently press
the shutter button again.
4.
Full-press the shutter button.
7.
Close the card cover so it
4.
clicks into place.
Close the battery compart-
NOTE
ment cover, and slide the
Pressing the monitor button (
battery compartment lock
monitor on.
from
to
.
It is also possible to take pictures while
looking at the monitor.
Enlarge Your Shots
The lens extends and the flash pops up.
When the lens does not extend, the lens barri-
er is not fully opened.
Slide the lens barrier open until it clicks.
Zoom bar
Green Lamp
Zoom status
(Displayed during
zoom lever operation.)
) turns the
Monitor
Turn the Power Off
1.
Push the zoom lever toward W
Close the lens barrier halfway. Just before the lens barrier
(Wide angle) to shoot wide-
comes in contact with the lens, it will make a click that you can
angle shots.
feel with your fingers.
Pull the zoom lever toward T
(Telephoto) to zoom in.
The lens will recess into the camera.
Do not push the lens barrier against the lens.
2.
Wait until the lens fully retracts, and then close the lens barrier
the rest of the way to turn the power off.
Monitor
HQ
3.
Close the flash.
T
T
W
W
HQ
T
T
W
W