Olympus DS-2000 Online Instructions Manual - Page 11

Browse online or download pdf Online Instructions Manual for Voice Recorder Olympus DS-2000. Olympus DS-2000 48 pages. Dss player for mac os 9 instructions (english)
Also for Olympus DS-2000: Instructions Manual (44 pages), Instructions Manual (36 pages)

Olympus DS-2000 Online Instructions Manual

Replacing Batteries

The battery indicator on the display changes
as the batteries lose power.
When the batteries are too weak, the recorder
shuts down and "BATTERY LOW" appears on
the display.
When
appears on the display, replace
the batteries as soon as possible. AAA alkaline
batteries* are recommended.
* The two AAA alkaline batteries provide
approximately 11 hours of continuous recording and
playback. Battery life depends on the operating
environment and other conditions.

Using the AC Adapter

Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet and
connect the power plug to the recorder's power
connector (DC 3 V) as shown in the illustration.
Always stop recording before connection.
Otherwise it may not be possible to play back
the voice data being recorded.
"BATTERY
LOW"
R E C
S T O P
E
E R A S
Notes
• Be sure to stop the recorder before replacing
the batteries. Unloading the batteries while the
recorder is recording, erasing or otherwise
accessing an audio file may corrupt the file.
• Be sure to replace both batteries at the same time.
• Never mix old and new batteries, or batteries
of different types and/or brands.
• If it takes longer than 3 minutes to replace dead
batteries, the internal rechargeable backup battery
will be exhausted, so you may have to reset the
time when you load fresh batteries.
• Remove the batteries if you are not going to use
the recorder for an extended period of time.
• Always stop recording before connection
or disconnection.
• When the AC adapter is not in use,
disconnect the power supply plug from
the power outlet.
• Use only the correct power supply voltage
as indicated on the adapter.
• Do not use the AC adapter when
connecting the recorder to the USB port.
11