Olympus BX43 Instructions Manual - Page 37
Browse online or download pdf Instructions Manual for Microscope Olympus BX43. Olympus BX43 48 pages. System microscope
10
ASSEMBLY
10-1 Assembly Diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
Assembly steps enclosed in
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching
CAUTION
any parts or touching glass surfaces.
} Most assembly operations are possible by using the Allen screwdriver (
However, the assembly of the reflected light illuminator requires the use of the provided Allen wrench (
the internal screws (to ensure the performance, we recommend that you have your Olympus representative assemble
or remove this module).
Eyepieces
WHN10X (FN 22)
WHN10X-H (FN 22)
SWH10X-H (FN 26.5)
MICRO SWH10X (FN 26.5), etc.
Observation tube
clamping screw
Revolving nosepiece
BX43-5RES
U-5RE-2
U-D6RE
U-D7RES, etc.
8
UIS2 series
objective
Slide holder
U-HLDT-4
U-HRDT-4, etc.
Stage clamping
knob
Stage
U-SVRB-4
U-SVLB-4, etc.
Stage feed knob
rubber caps
U-SHG
U-SHGT
Condenser
U-LC
U-AC2
U-SC3
U-UCD8 (T2), etc.
will be detailed on the subsequent pages.
Observation tube
7
U-BI30-2
U-TTLBI
U-TR30-2, etc.
6
9
Arm
BX3-ARM
Revolving nosepiece
clamping screw
Slide holder
1
clamping knobs
5
Condenser
clamping knob
10
11
AC adapter for
microscope
Intermediate attachment
U-EPA2
U-DO3
U-TRU, etc.
Lamp housing adapter
U-LS30ADP
4
3
Microscope frame
2
BX43F
Auxiliary lens for
U-LC
Power supply unit
TL4
12
Power cord
) provided with the microscope.
) for clamping
Reflected light
mercury/xenon
lamp housing
Vertical illuminator
BX3-URA
BX3-RFAS, BX3-RFAA, etc.
Halogen bulb
6W30WHAL
4
4
Lamp socket
U-LS30-5
Lamp cable
LED lamp housing
U-LHLEDC
4
Power cord
12
BX43
33