Olympus BX51 Instructions Manual - Page 16

Browse online or download pdf Instructions Manual for Microscope Olympus BX51. Olympus BX51 34 pages. System
Also for Olympus BX51: Operating Manual (17 pages), Instructions Manual (40 pages), Instructions Manual (37 pages), Operating Manual (11 pages)

Print Page

Fig. 15

Fig. 16

Stage Height Adjustment

}By lowering the position of the substage, the microscope will accom-

modate specimens with a maximum height of 40 mm. This is useful

when observing metallurgical specimens and other thick objects.

1. Lower the stage to its lower limit, then remove the stage from the

microscope. (See page 4.)

2. Using the Allen screwdriver, loosen the substage bracket clamping

screw @ and remove the substage assembly. (Fig. 15)

3. Turn the coarse adjustment knob and raise the focusing block ³ to

where the stopper screw ² in the arm becomes visible. (Fig. 16)

4. Using the Allen screwdriver, loosen and remove the upper stopper

screw ².

5. Reattach substage assembly and stage.

}Store the remove stopper screw ² in a safe place so that it will not be

lost, if needed again.

BX51/52-P

(Figs. 15 & 16)