Olympus BX53 Instructions Manual - Page 41

Browse online or download pdf Instructions Manual for Microscope Olympus BX53. Olympus BX53 48 pages. Polarizing microscope
Also for Olympus BX53: User Manual (9 pages), Instructions Manual (36 pages)

Print Page

Fig. 52

Fig. 53

Attaching the Lamp Housing Cable

and Power Cord

· Cables and cords are vulnerable when bent or twisted. Never

CAUTION

subject them to excessive force.

· Make sure that the main switch is set to "

necting the power cord.

1. Connect the lamp housing cable connector @ into the connector 2 on

the rear of the microscope.

Always use the power cord provided by Olympus. If no power

CAUTION

cord is provided with the microscope, please select the proper

power cord by referring to section " PROPER SELECTION OF THE

POWER SUPPLY CORD " at the end of this instruction manual.

2. Connect the power cord plug 3 to the AC receptacle |.

The power cord should be connected to a grounded/earthed,

CAUTION

3-conductor power outlet. If the power outlet is not grounded/

earthed properly, Olympus can no longer warrant the electrical

safety performance of the equipment.

3. Plug the power cord plug 5 into the wall outlet 6.

Should the power cord come in contact with the hot lamp

CAUTION

housing, the power cord could melt and cause electric shock.

Be sure to route the power cord away from the lamp housing.

BX53

(Figs. 52 & 53)

" (OFF) before con-