Olympus BX60 Instructions Manual - Page 8

Browse online or download pdf Instructions Manual for Microscope Olympus BX60. Olympus BX60 48 pages. System microscope
Also for Olympus BX60: Quick Start Manual (4 pages)

Print Page

BX60

Fig. 3

fio-4

Mounting tKS

(Universal COBe Housing)-

(Rg*. 3,*)

O The following procedure does not apply to the briflhfieMWartfield mirror

cube housing.

* Loosen the screw that secures tha cube housing to the frame

with tha provided Allan screwdriver. It is located In the hole at

the right side of the arm.

1. Invert the cube housing so that the cube dovetail mounts on the turret

@ point upward.

(Dummy plates are mounted in three of the four cube positions. When

you wish to use only one cube, mount it in tha empty position. When

using tw6 or more cubes, loosen the clamping screw <D and remove

the dummy ptatels) by puffing in the direction infested by the arrow,

and then mount tha actual eubslsl in its place.)

2. Hold tha cube to be mounted with its index side facing upward and

slide it all the way onto the dovetail mount Next be sure to tighten

the cube damping screw © immediately. (Tighten all (our cube damp

ing screws.)

3. Remove the cube's magnetic index sticker rj>* end affix it to the corre

sponding turret position.

(Fig. 4)

*U» a sharp abject such as the tip of a ballpoint pan or macfiinical pared to

lift tha Cuba's mfignatic indax sockar.

* The cube indices A, B.C. D® on the dovetail mount correspond

to the turret's A, B, C, D Indices (JX Make sure to match tha

attached cube correctly with the position of the removed magnetic

index sticker on the turret (Fig. 5)

Mounting the Cub« Housing.

(Ro,«

the arm and fully slide it into tha arm.

2. insert the Allen screwdriver through the hole ® on the right side of

the arm. then securely tighten the cube housing damping screw.

Fig. 8