Olympus BX61 Instructions Manual - Page 33

Browse online or download pdf Instructions Manual for Microscope Olympus BX61. Olympus BX61 40 pages. Motorized system microscopes

Print Page

ASSEMBLY

7-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.

The BX61TRF microscope frame is assembled in the same procedures.

The module model numbers shown in the following diagram are merely the typical examples. For the modules with which

the model numbers are not given, please consult your Olympus representative or the catalogues.

# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts

or touching glass surfaces.

Assembly steps enclosed in

}Most assembly operations are possible by using the Allen screwdriver (

ever, the assembly of the reflected light illuminator requires the use of the provided Allen wrench (

internal screws (to ensure the performance, we recommend that you have your Olympus representative assemble or

remove this module).

Eyepiece

WHN10X (FN 22)

35WHN10X (FN 22)

SWH10X-H (FN 26.5)

35SWH10X (FN 26.5)

Revolving nosepiece

U-D6RE

U-D6REM

U-D6REMC, etc.

Slide holder

U-HLDT-4

U-HRDT-4

U-HLST-4

UIS2/UIS

series

objective

Stage clamping

knob

Stage

U-SVRB-4

U-SVLB-4

U-SRG

Condenser

U-SC3

U-AAC

U-UCD8A

}For the electrical connections, refer to the instruction manual of the BX-UCB control box.

For the setup and installation of the Z-board, see page 30.

will be detailed on the subsequent pages.

Observation tube

U-BI30-2 (FN 22)

U-TR30-2 (FN 22)

U-TR30NIR (FN 22)

U-TBI3 (FN 22)

U-SWTR-3 (FN 26.5)

U-ETBI (FN 22)

U-TTBI (FN 22)

Specimen

holder

clamping

knobs

Microscope frame

(Transmitted light

specification)

Condenser clamping

BX61TRF

screw

Reflected light illuminator

BX-RFAA

BX-RLAA

Intermediate

attachment

U-EPA2

U-DO3

U-TRU, etc.

Tube clamping

screw

Revolving

nosepiece

clamping screw

Lamp socket

clamping screw

) provided with the microscope. How-

) for clamping the

Reflected

lamp

housing

Microscope frame

(Transmitted/reflected

light specification)

BX61TRF

100 W halogen

lamp housing

U-LH100-3

100 W halogen bulb

12V100WHAL-L

12V50WHAL-L

BX61