Olympus BXC-FSU Instructions Manual - Page 6

Browse online or download pdf Instructions Manual for Microscope Olympus BXC-FSU. Olympus BXC-FSU 41 pages. Modular microscope assemblies hardware

Print Page

Safety precautions

If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

product may also be damaged. Always use the product according to this instruction manual.

The following symbols are used in this instruction manual.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be

used to alert against unsafe practices or potential material damage.

NOTE:

Indicates a potential situation which, if not avoided, may result in failure of this instrument.

TIP:

Indicates the useful knowledge or information for use.

CAUTION:

Never peel off the warning label.

This product is specified as CLASS 1 laser product.

CLASS 1 LASER PRODUCT (IEC60825-1:2007 / IEC60825-1:2014)

This product complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described

in Laser Notice No. 56, dated May 8,2019.

Do not remove the cover.

It is very dangerous to remove the cover using a tool as the built-in laser will be accessible. Never remove the cover as it

could also cause failure of the product.

Built-in laser (semiconductor laser)

Wavelength: 780 nm

Maximum power output: 10 mW

Beam divergence: 35°

2.2

CAUTION: Safety precautions

Transportation

When carrying each unit, be careful not to drop it.

If the unit falls, your foot, etc. may get injured.

2.3

WARNING: Prevention of electric shock

Never disassemble any part of this product.

2. Safety precautions

Warning label position: Right side surface of BXC-FSU

2.1 Laser safety