Olympus BXFM Series Instructions Manual - Page 27

Browse online or download pdf Instructions Manual for Microscope Olympus BXFM Series. Olympus BXFM Series 36 pages. Focusing unit

Print Page

ASSEMBLY

10-1 Assembly Diagram

· The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.

· The module numbers shown in the following diagram are merely the typical examples. For the modules with which the

module numbers are not given, please consult your Olympus representative or the catalogues.

# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts

or touching glass surfaces.

}Assembly steps enclosed in

}All assembly operations are possible by using the Allen screwdriver (

the BX-URA2 or BX-RLA2 vertical illuminator should be attached using the Allen wrench (

to clamp the internal screws.

Eyepiece

WHN10X (FN 22)

35WHN10X (FN 22)

SWH10X-H (FN 26.5)

35SWH10X (FN 26.5)

Observation tube

Reflected

clamping screw

light

illuminator

Analyzer

BX-URA2

U-AN

BX-RLA2

U-AN360-3

Polarizer

U-PO3

U-POTP3

Revolving

nosepiece

Illuminator holder

BXFM-ILH

Objective

adapter

BD-M-AD

Brightfield

objective

Brightfield

objective

will be detailed on the subsequent pages.

Observation tube

U-BI30-2 (FN 22)

U-TR30-2 (FN 22)

U-TBI3 (FN 22)

U-SWTR-3 (FN 26.5)

Compact reflected

light brightfield

Filter

illuminator

U-25ND6-2

U-KMAS

U-25ND25-2

U-25ND50-2

U-25LBD

U-25IF550

Illuminator

clamping

knob

Revolving

nosepiece

Illuminator

clamping

holder S

screw

BXFM-ILHS

Counter spring

BXFM-ILHSPU

) provided with the microscope. However,

Intermediate

attachment

U-CA

U-DP

U-APT

Lamp housing

clamping knob

Halogen lamp bulb

12V100WHAL-L

12V50WHAL-L

Focusing unit

BXFM-F

Pillar clamping

knob

Stand

U-ST

) provided with the illuminator

Halogen lamp

housing

U-LH100-3

Power cord

Power supply

TH4

Hand switch

TH4-HS

BXFM