Olympus BXFMA Instructions Manual - Page 7

Browse online or download pdf Instructions Manual for Microscope Olympus BXFMA. Olympus BXFMA 36 pages. Motorized illumination system with motorized focusing unit

Print Page

Warnings

Warning engravings/sticklers are placed at parts where special precaution is required when handling and using the

system. Always heed the warnings.

Warning engraving

positions

Warning sticker

positions

Getting Ready

1. The illuminator is a precision instrument incorporating motorized parts. Always install it horizontally (it is inhibited to install

it on the side panel), handle it with care and avoid subjecting it to sudden or severe impact.

2. Do not use the system where it is subjected to direct sunlight, high temperature and humidity, dust or vibrations. (For

operating conditions, see Chapter 6, "SPECIFICATIONS" on page 19).

3. Only one intermediate attachment can be used, by installing the U-AFA1M active AF unit, U-CA magnification changer or

U-EPA2 eye point adjuster above the motorized illuminator.

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

!Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the non-optical components of the microscope system. To clean them,

use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

3. Never attempt to disassemble any part of the microscope system.

4. When not using the microscope, set the main switch to " " (OFF), wait until the lamp housing has cooled down, and

cover the microscope with a dust cover before storage.

5. When disposing of this product, check the regulations and rules of your local government and be sure to observe them.

Caution

If the system is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

!: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

Lamp housing

(U-LH100L-3, U-LH100-3)

Motorized illuminator

BXFMA-F

Active AF unit

U-AFA1M

(High Temperature

warning )

(Finger injury

warning)

(Laser warning)

BXFMA