Olympus MX61 Assembly Manual - Page 43

Browse online or download pdf Assembly Manual for Microscope Olympus MX61. Olympus MX61 49 pages. 200mm/300mm compatible semiconductor/fpd inspection microscopes

Print Page

PROPER SELECTION OF THE POWER SUPPLY CORD

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to " Specifications " and

" Certified Cord " below:

CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the

electrical safety of the equipment.

Voltage Rating

Current Rating

Temperature Rating

Length

Fittings Configuration

A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with an

agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of agencies listed in

Table 1. In case you are unable to buy locally in your country the power supply cord which is approved by one of the

agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized agencies in

your country.

Country

Argentina

IRAM

Australia

SAA

Austria

ÖVE

Belgium

CEBEC

Canada

CSA

Denmark

DEMKO

Finland

FEI

France

UTE

Germany

VDE

Ireland

NSAI

Specifications

125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)

6A minimum

60°C minimum

3.05 m maximum

Grounding type attachment plug cap. Opposite terminates in molded-on IEC con-

figuration appliance coupling.

Table 1 Certified Cord

Certification

Agency

Mark

Country

Agency

Italy

IMQ

JET, JQA, TÜV,

Japan

UL-APEX / MITI

Netherlands

KEMA

Norway

NEMKO

Spain

AEE

Sweden

SEMKO

Switzerland

SEV

United

ASTA

Kingdom

BSI

U.S.A.

MX61/MX61L

Certification

Mark