AXIXTECH SAF205H Installation And Operation Manual - Page 14
Browse online or download pdf Installation And Operation Manual for Amplifier AXIXTECH SAF205H. AXIXTECH SAF205H 16 pages. Electronic handheld siren
Print Page
LIGHT CONTROLS
The 3 LV buttons (LV1, LV2, LV3) in the top
area of the handheld controller are dedicated
for primary lighting functions. There are
additional 4 programmable on/off buttons for
auxiliary lighting or other devices.
LV buttons – The LV buttons can be set
to operate as a Progressive or Non-
progressive switching. There are four
modes available.
LV Button Modes
LV Button Modes:
LV1
LV2
LV3
Progressive/Non-progressive Switch - There are 4 different combination modes available. This is
configured by setting the DIP-SW 2-5 (LV_SW1) and DIP-SW 2-6 (LV_SW2) option. At each of
the LV switches, it is possible to program the additional AUX on/off buttons to be activated
together.
LV3 Button – When LV3 is switched on, the siren tone is automatically activated. This function
can be disabled by setting the DIP-SW2-7 (AUTSR_D) option; see OPTION SWITCHES section.
VID Output Option – The VID output is activated whenever the unit is in SIREN or HF modes.
(Available in future models).
AUXILIARY Buttons – The 4 lighted on/off
buttons are for controlling other lighting
functions or devices. SW1~SW3 buttons can
be programmed for three operating modes
such as Push On/Off, Momentary, or Timed
momentary; see PROGRAMMING section.
SW4 button is designed to control SW4 and
SW5 outputs, which is mainly used to control
the traffic arrow functions.
MODE1
LV_SW1 off
LV_SW2 off
LV1
LV2
LV1、LV2、LV3
LV2
LV1
MODE2
LV_SW1 off
LV_SW1 on
LV_SW2 on
LV_SW2 off
LV1
LV2
LV3
LV1、LV2、LV3
SW1
SW2
SW4
SW5
- 13 -
LV3
MODE3
LV_SW1 on
LV_SW2 on
LV1、LV3
LV2、LV3
LV1、LV2
LV1、LV2、LV3
LV3
LV2
LV1
MAN
HORN
HF
SIREN
RADIO
SW1
SW2
SW4
SW5
MODE4
LV1
LV3
LV2
LV1
MAN
HORN
HF
SIREN
RADIO
SW1
SW2
SW4
SW5