Olympus U-HSEXP Instructions Manual - Page 14
Browse online or download pdf Instructions Manual for Microscope Olympus U-HSEXP. Olympus U-HSEXP 16 pages. Coded function system
Also for Olympus U-HSEXP: Instructions Manual (16 pages)
Print Page
3
2
1
Fig. 3
11
Attaching the U-HSEXP (Fig. 3)
} The U-HSEXP is composed of the U-HSEXP switch (fixed by magnet) and
circular iron plates (adhesive). Two circular plates are provided, with one of
them intended for use as the spare.
1. Attach the switch @ on the center of the circular plate 2 by means of
magnet.
Do not remove the backing sheet of the circular plate until the final fixing
position is decided.
2. Decide the final fixing position that is most convenient for controlling the
switch from the area 3 (indicated by
adjustment knob on the left or right.
3. Clean the final fixing position with absolute alcohol, remove the backing
sheet from the round plate and apply it securely on the final fixing positi-
on.
CAUTION
If there is an article with magnetic field near the U-HSEXP, equip-
ment failure or malfunction may result. So do not let such an
article as listed below come close to the U-HSEXP.
· PC
· Mobile phone
· Clock/watch
· Credit card
· Bank card
· Floppy disk, etc.
} Unless the coded revolving nosepiece (U-D7RES, U-5RES-ESD, U-
D5BDRES-ESD) is connected to the U-CBS, the U-HSEXP does not function.
So be careful.
in the figure) near the coarse