Olympus PT-E05 Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Camera Accessories Olympus PT-E05. Olympus PT-E05 42 pages. Underwater case for digital camera e-520

Print Page

Connecting the underwater optical fiber cable

To connect the separately available UFL-2 underwater

flash to the Case using an underwater optical fiber cable

(optional), follow the procedures below.

• Put the underwater optical fiber cable plug all the way

into the optical fiber cable insertion slot.

Removing the TTL cable connector cap

To perform TTL flash shooting by connecting the separately available underwater flash or other products

to the Case using the underwater TTL cable (optional), remove the TTL cable connector cap as

described below.

1 Remove the TTL cable connector cap

from the Case.

2 Connect the underwater TTL cable

(optional) to the TTL connector on the

Case.

How to attach the TTL cable connector cap to the case

Make sure there is no foreign matter attached to the O-rings inside the cap and on the TTL cable

connector. To secure the cap, gently turn it clockwise until it stops.

Check O-rings

Cap

TTL cable connector

cap

1 Turn counter

clockwise.

3 Insert into the

connector.

4 Turn the threaded

section of the

connector clockwise

lightly until it stops.

1 Attach the cap to

the case.

Connector

2 Remove.

Underwater TTL

cable

Use this mark to

align the position.

2 Gently turn the cap

clockwise until it

stops.

EN 12