Olympus PT-E06 Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Camera Accessories Olympus PT-E06. Olympus PT-E06 30 pages. Underwater camera case

Print Page

Install the Waterproof Port

To enable the Case to be used underwater, the separately available Waterproof Port for the camera lens

must be installed on the Case. Align the Waterproof Port with the position where the camera lens will be

when the camera is loaded in the Case.

• Refer to the instruction manual provided with the Waterproof Port before attaching the Waterproof Port

to the Case.

• Apply the provided Silicon grease to the O-ring section of the Waterproof Port and the Waterproof Port

mounting thread on the Case.

• Screw the Waterproof Port into the Case by turning it clockwise all the way.

Waterproof Port mount thread

CAUTION:

The Case should not be used underwater at depths that exceed 40 meters. Even when the attached

underwater lens port or other equipment is able to withstand depths exceeding 40 meters, the Case itself

cannot be used at depths of more than 40 meters.

Attach the hand strap to the Case.

Hand strap

Silicon grease

Hand strap ring

EN 8