Olympus SP-310/SP350 Instruction Manual - Page 22

Browse online or download pdf Instruction Manual for Camera Accessories Olympus SP-310/SP350. Olympus SP-310/SP350 44 pages. Underwater case

Print Page

Check the loading status.

Always perform the following final checks before sealing the Case.

Has the digital camera been loaded so that the zoom lever operates

properly?

Has the silica gel been inserted all the way at the specified position?

Are the O-ring and the O-ring contact surface free of dirt and other

foreign matter?

Is the O-ring installed properly both on the front and rear lids?

Is the TTL cable connector cap attached securely?

When the rear lid is closed

(quietly, so that the O-ring

will not come out of the

groove), the buckles are

engaged with the edge of

the rear lid, and the buckle

lock levers are pushed down

in arrow direction, the Case

will be sealed airtight.

CAUTION

: • Seal the Case by turning both buckle lock levers down in

arrow direction. When one of the buckles is left open, the

Case will not be sealed and water leakage will be caused.

Install the special balance

weight to the tripod

mounting thread at the

bottom of the Case.

Install the balance weight

securely by tightening the

accessory screw of the

balance weight.

E-21